220.127.116.11. Basic Trigger Conditions
To specify the trigger pattern, right-click the Trigger Conditions column and click Don’t Care, Low, High, Falling Edge , Rising Edge, or Either Edge.
For buses, type a pattern in binary, or right-click and select Insert Value to enter the pattern in other number formats. Note that you can enter X to specify a set of “don’t care” values in either your hexadecimal or your binary string. For signals in the .stp file that have an associated mnemonic table, you can right-click and select an entry from the table to specify pre-defined conditions for the trigger.
When you add signals through plug-ins, you can create basic triggers using predefined mnemonic table entries. For example, with the Nios® II plug-in, if you specify an .elf file from your Nios® II IDE design, you can type the name of a function from your Nios® II code. The logic analyzer triggers when the Nios® II instruction address matches the address of the code function name that you specify.
Data capture stops and the logic analyzer stores the data in the buffer when the logical AND of all the signals for a given trigger condition evaluates to TRUE.
Did you find the information on this page useful?