25G Ethernet Intel® Stratix® 10 FPGA IP Design Example User Guide

Download
ID 683252
Date 6/18/2020
Public
Document Table of Contents

1.6.1. Procedure

After you compile the 25G Ethernet Intel® FPGA IP core design example and configure it on your Intel® Stratix® 10 device, you can use the System Console to program the IP core and its embedded Native PHY IP core registers.

To turn on the System Console and test the hardware design example, follow these steps:

  1. In the Intel® Quartus® Prime Pro Edition software, select Tools > System Debugging Tools > System Console to launch the system console.
  2. In the Tcl Console pane, type cd hwtest to change directory to /hardware_test_design/hwtest.
  3. Type source main.tcl to open a connection to the JTAG master.
Follow the test procedure in the Hardware Testing section of the design example and observe the test results in the System Console.

Did you find the information on this page useful?

Characters remaining:

Feedback Message