Low Latency 100-Gbps Ethernet IP Core User Guide

ID 683160
Date 4/15/2021
Public
Document Table of Contents

2.6. Files Generated for Arria 10 Variations

The Intel® Quartus® Prime software generates the following IP core output file structure when targeting Arria 10 devices.

For information about the file structure of the design example, refer to the LL 100GbE Design Example User Guide.

Figure 6.  LL 100GbE IP Core Generated Files for Arria 10 Variations
Table 12.  IP Core Generated Files

File Name

Description

<your_ip>.qsys ( Intel® Quartus® Prime Standard Edition only)

The Platform Designer (Standard) system or top-level IP variation file. <your_ip> is the name that you give your IP variation.

<your_ip>.ip ( Intel® Quartus® Prime Pro Edition only)

<system>.sopcinfo

Describes the connections and IP component parameterizations in your Platform Designer (Standard) system. You can parse its contents to get requirements when you develop software drivers for IP components. ( Intel® Quartus® Prime Standard Edition only)

Downstream tools such as the Nios® II tool chain use this file. The .sopcinfo file and the system.h file generated for the Nios® II tool chain include address map information for each slave relative to each master that accesses the slave. Different masters may have a different address map to access a particular slave component.

<your_ip>.cmp The VHDL Component Declaration (.cmp) file is a text file that contains local generic and port definitions that you can use in VHDL design files.

This IP core does not support VHDL. However, the Intel® Quartus® Prime software generates this file.

<your_ip>.html

A report that contains connection information, a memory map showing the address of each slave with respect to each master to which it is connected, and parameter assignments.

<your_ip>_generation.rpt IP or Platform Designer (Standard) generation log file. A summary of the messages during IP generation.
<your_ip>.debuginfo Contains post-generation information. Used to pass System Console and Bus Analyzer Toolkit information about the Platform Designer (Standard) interconnect. The Bus Analysis Toolkit uses this file to identify debug components in the Platform Designer (Standard) interconnect. ( Intel® Quartus® Prime Standard Edition only)
<your_ip>.qgsimc Lists simulation parameters to support incremental regeneration. ( Intel® Quartus® Prime Pro Edition only)
<your_ip>.qgsynthc Lists synthesis parameters to support incremental regeneration. ( Intel® Quartus® Prime Pro Edition only)
<your_ip>.qip

Contains all the required information about the IP component to integrate and compile the IP component in the Intel® Quartus® Prime.

<your_ip>.csv Contains information about the upgrade status of the IP component.

<your_ip>.bsf

A Block Symbol File (.bsf) representation of the IP variation for use in Intel® Quartus® Prime Block Diagram Files (.bdf).

<your_ip>.spd

Required input file for ip-make-simscript to generate simulation scripts for supported simulators. The .spd file contains a list of files generated for simulation, along with information about memories that you can initialize.

<your_ip>.ppf The Pin Planner File (.ppf) stores the port and node assignments for IP components created for use with the Pin Planner.
<your_ip>_bb.v You can use the Verilog black-box (_bb.v) file as an empty module declaration for use as a black box.
<your_ip>.sip Contains information required for NativeLink simulation of IP components. You must add the .sip file to your Intel® Quartus® Prime project.
<your_ip>_inst.v or _inst.vhd HDL example instantiation template. You can copy and paste the contents of this file into your HDL file to instantiate the IP variation.

This IP core does not support VHDL. However, the Intel® Quartus® Prime software generates this file.

<your_ip>.regmap If IP contains register information, .regmap file generates. The .regmap file describes the register map information of master and slave interfaces. This file complements the .sopcinfo file by providing more detailed register information about the system. This enables register display views and user customizable statistics in the System Console.
<your_ip>.svd

Allows hard processor system (HPS) System Debug tools to view the register maps of peripherals connected to HPS within a Platform Designer (Standard) system.

During synthesis, the .svd files for slave interfaces visible to System Console masters are stored in the .sof file in the debug section. System Console reads this section, which Platform Designer (Standard) can query for register map information. For system slaves, Platform Designer (Standard) can access the registers by name.

<your_ip>.v

or

<your_ip>.vhd
HDL files that instantiate each submodule or child IP core for synthesis or simulation.

This IP core does not support VHDL. However, the Intel® Quartus® Prime software generates this file.

mentor/

Contains a ModelSim* script msim_setup.tcl to set up and run a simulation.

aldec/

Contains a Riviera-PRO* script rivierapro_setup.tcl to setup and run a simulation.

synopsys/vcs/

synopsys/vcsmx/

Contains a shell script vcs_setup.sh to set up and run a VCS® simulation.

Contains a shell script vcsmx_setup.sh and synopsys_ sim.setup file to set up and run a VCS* MX simulation.

cadence/

Contains a shell script ncsim_setup.sh and other setup files to set up and run an NCSIM simulation.

submodules/ Contains HDL files for the IP core submodule.
<child IP cores>/ For each generated child IP core directory, Platform Designer (Standard) generates synth/ andsim/ sub-directories.

Did you find the information on this page useful?

Characters remaining:

Feedback Message