Intel® Quartus® Prime Pro Edition User Guide: Debug Tools

ID 683819
Date 7/08/2022

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.2.1. Required Components

To perform analysis using the LAI you need the following components:
  • Intel® Quartus® Prime software version 15.1 or later
  • The device under test
  • An external logic analyzer
  • An Intel FPGA communications cable
  • A cable to connect the Intel-supported device to the external logic analyzer
Figure 95. LAI and Hardware Setup

Notes to figure:

  1. Configuration and control of the LAI using a computer loaded with the Intel® Quartus® Prime software via the JTAG port.
  2. Configuration and control of the LAI using a third-party vendor logic analyzer via the JTAG port. Support varies by vendor.