Parallel Flash Loader Intel® FPGA IP User Guide

ID 683698
Date 7/23/2021

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Give Feedback

1.4.7. Creating Jam Files for Intel® CPLDs and Flash Memory Device Programming

To use .jam files to program the CPLD and flash memory device, follow these steps:

  1. Open the Intel® Quartus® Prime Programmer window and click Add File to add the .pof for the CPLD.
  2. Right-click the CPLD .pof and click Attach Flash Device.
  3. In the Flash Device menu, select the density of the flash memory device to be programmed.
  4. Right-click the necessary flash memory device density and click Change File.
  5. Select the .pof generated for the flash memory device. The .pof for the flash memory device is attached to the .pof of the CPLD.
  6. On the File menu, point to Create/Update and click Create JAM, JBC, SVF, or ISF File.
  7. Enter a name and select the file format (.jam).
  8. Click OK.
    Note: Use the .jam files with the Intel® Quartus® Prime Programmer or quartus_jli executable file.