DisplayPort Intel® FPGA IP User Guide

ID 683273
Date 9/02/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.3.4.1. Set Up the Hardware

Set up the hardware using the following steps:

  1. Connect the Bitec daughter card to the FPGA development board.
  2. Connect the development board to your PC using a USB cable.
    Note: The FPGA development board has an On-Board Intel® FPGA Download Cable II connection. If your version of the board does not have this connection, you can use an external Intel® FPGA Download Cable. Refer to the documentation for your board for more information.
  3. Connect a DisplayPort cable from the DisplayPort TX on the Bitec HSMC daughter card to a DisplayPort monitor (do not power up the monitor).
  4. Power-up the development board.
  5. Connect one end of a DisplayPort cable to your PC (do not connect the other end to anything).