GPIO-B Single-Ended I/O Standards Specifications
GPIO-B Single-Ended SSTL, HSTL, HSUL, POD and LVSTL I/O Reference Voltage Specifications
GPIO-B Single-Ended SSTL, HSTL, HSUL, and POD I/O Standards Signal Specifications
GPIO-B Single-Ended LVSTL I/O Standards Specifications
GPIO-B Differential SSTL, HSTL, and HSUL I/O Standards Specifications
GPIO-B Differential POD I/O Standards Specifications
GPIO-B Differential LVSTL I/O Standards Specifications
GPIO-B Differential I/O Standards Specifications
LVDS SERDES Specifications
DPA Lock Time Specifications
LVDS SERDES Soft-CDR Sinusoidal Jitter Tolerance Specifications
Memory Standards Supported
Memory Output Clock Jitter Specifications
Performance Specifications of the HBM2E Interface
Performance Specifications of Network on Chip (NoC)
NOC Reference Clock Requirements
HPS Clock Performance
HPS Internal Oscillator Frequency
HPS PLL Specifications
HPS Cold Reset
HPS SPI Timing Characteristics
HPS SD/MMC Timing Characteristics
HPS USB UPLI Timing Characteristics
HPS Ethernet Media Access Controller (EMAC) Timing Characteristics
HPS I2C Timing Characteristics
HPS NAND Timing Characteristics
HPS Trace Timing Characteristics
HPS GPIO Interface
HPS JTAG Timing Characteristics
HPS Programmable I/O Timing Characteristics
Memory Output Clock Jitter Specifications
The clock jitter specification applies to the memory output clock pins clocked by an I/O PLL, or generated using double data I/O circuits clocked by a PLL output routed on a PHY clock network as specified. Intel recommends using PHY clock networks for better jitter performance.
The memory clock output jitter is within the JEDEC* specifications when the phase jitter (integration bandwidth 10 kHz to 50 MHz) of the input clock is not more than 20 ps peak-to-peak, or 1.42 ps RMS at 1e-12 BER and 1.22 ps at 1e-16 BER.