LVDS SERDES Specifications
DPA Lock Time Specifications
LVDS SERDES Soft-CDR Sinusoidal Jitter Tolerance Specifications
Memory Standards Supported
Memory Output Clock Jitter Specifications
Performance Specifications of the HBM2E Interface
Performance Specifications of Network on Chip (NoC)
NOC Reference Clock Requirements
HPS Clock Performance
HPS Internal Oscillator Frequency
HPS PLL Specifications
HPS Cold Reset
HPS SPI Timing Characteristics
HPS SD/MMC Timing Characteristics
HPS USB UPLI Timing Characteristics
HPS Ethernet Media Access Controller (EMAC) Timing Characteristics
HPS I2C Timing Characteristics
HPS NAND Timing Characteristics
HPS Trace Timing Characteristics
HPS GPIO Interface
HPS JTAG Timing Characteristics
HPS Programmable I/O Timing Characteristics
I/O Standard | VCCIO_PIO (V) | VIL (V) | VIH (V) | VOL (V)kid1657772111431.html#ds_9_bf4845259230__fn_seios-f1 | VOH (V)kid1657772111431.html#ds_9_bf4845259230__fn_seios-f1 | ||||
---|---|---|---|---|---|---|---|---|---|
Minimum | Typical | Maximum | Minimum | Maximum | Minimum | Maximumkid1657772111431.html#ds_9_bf4845259230__fn_seios-f2 | Maximum | Minimum | |
1.3 V LVCMOS | 1.261 | 1.3 | 1.339 | –0.3 | 0.35 × VCCIO_PIO | 0.65 × VCCIO_PIO | VCCIO_PIO + 0.25 | 0.25 × VCCIO_PIO | 0.75 × VCCIO_PIO |
1.2 V LVCMOS | 1.14 | 1.2 | 1.26 | –0.3 | 0.35 × VCCIO_PIO | 0.65 × VCCIO_PIO | VCCIO_PIO + 0.25 | 0.25 × VCCIO_PIO | 0.75 × VCCIO_PIO |
1.1 V LVCMOS | 1.045 | 1.1 | 1.155 | –0.3 | 0.35 × VCCIO_PIO | 0.65 × VCCIO_PIO | VCCIO_PIO + 0.25 | 0.25 × VCCIO_PIO | 0.75 × VCCIO_PIO |
1.05 V LVCMOS | 0.9975 | 1.05 | 1.1025 | –0.3 | 0.35 × VCCIO_PIO | 0.65 × VCCIO_PIO | VCCIO_PIO + 0.25 | 0.25 × VCCIO_PIO | 0.75 × VCCIO_PIO |
40 Applicable to test condition of IOH and IOL at 2 mA.
41 For LVCMOS pin utilization of equal to or less than 25 pins within a bank, the VIH(max) for the LVCMOS input can go up to VCCIO_PIO + 0.3 V.