Intel® Stratix® 10 SoC FPGA Boot User Guide

ID 683847
Date 7/26/2022

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

2.2.3. Single SDM Flash

In this case, the Quad SPI flash connected to the SDM contains all the data required for configuring and booting the system, including the configuration bitstream, bootloader and OS files.

Note: When you use the HPS to access the SDM Quad SPI, it operates at a lower bandwidth of ~4-6 MB/s. This is due to the high latency of the PSI link between HPS and SDM, and the fact that all transfers are done in Programmed IO (PIO) mode, instead of DMA mode.

Software running on the HPS must request permission from the SDM to get exclusive access to the QSPI before using it. This is already implemented in the U-Boot and UEFI bootloaders supported by Intel® .

Figure 4. FPGA Configuration First Layout with Quad SPI