Intel® Stratix® 10 High-Speed LVDS I/O User Guide

ID 683792
Date 7/13/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.3.1. I/O Timing Analysis

The LVDS I/O standard enables high-speed transmission of data, resulting in better overall system performance. To take advantage of fast system performance, you must analyze the timing for these high-speed signals. Timing analysis for the differential block is different from traditional synchronous timing analysis techniques.

Receiver Timing Analysis in Soft-CDR and DPA-FIFO Modes

The DPA hardware dynamically captures the received data in soft-CDR and DPA-FIFO modes. For these modes, the Timing Analyzer does not perform static I/O timing analysis.

Receiver Timing Analysis in Non-DPA Mode

In non-DPA mode, use RSKM, TCCS, and sampling window (SW) specifications for high-speed source-synchronous differential signals in the receiver data path. If there is additional board channel-to-channel skew, consider the total receiver channel-to-channel skew (RCCS) instead of TCCS where .

To obtain accurate RSKM results in the Timing Analyzer, add this line of code to your .sdc to specify the RCCS value:
set ::RCCS($<lvds_instance_name>) <RCCS value in nanoseconds>

For example, set ::RCCS($my_lvds_instance) 0.0.

Transmitter Timing Analysis

For LVDS transmitters, the Timing Analyzer provides the transmitter channel-to-channel skew (TCCS) value in the TCCS report (report_TCCS) in the Intel® Quartus® Prime compilation report, which shows TCCS values for serial output ports. You can also get the TCCS value from the device datasheet.

TCCS is the maximum skew observed across the channels of data and TX output clock—the difference between the fastest and slowest data output transitions, including the TCO variation and clock skew.