Intel® Stratix® 10 10GBASE-KR PHY IP Core User Guide

ID 683500
Date 1/29/2021
Document Table of Contents
Give Feedback

7.1.4. Generating the Design Example

Figure 12. Procedure
Figure 13. Example Design Tab in the Intel® Stratix® 10 10GBASE-KR Parameter Editor

Follow these steps to generate the hardware design example and testbench:

  1. In the Intel® Quartus® Prime Pro Edition, click File > New Project Wizard to create a new Intel® Quartus® Prime project, or File > Open Project to open an existing Intel® Quartus® Prime project. The wizard prompts you to specify a device family and device.
  2. In the IP Catalog, locate and double-click Stratix 10 10GBASE-KR PHY. The New IP Variant window appears.
  3. Specify a top-level name <your_ip> for your custom IP variation. The parameter editor saves the IP variation settings in a file named <your_ip> .ip.
  4. Click OK. The parameter editor appears.
  5. On the IP tab, specify the parameters for your IP core variation.
  6. On the Example Design tab, for Select Board option, select the Stratix 10 GX Transceiver Signal Integrity Board, then select Target Device for Example Design to match the device on target board.
    If you select None for Select Board option, then the design example is generated for the device you select when you create a project.
  7. Click the Generate Example Design button. The Select Example Design Directory window appears.
  8. If you want to modify the design example directory path or name from the defaults displayed (xcvr_10gkr_s10_0_example_design), browse to the new path and type the new design example directory name ( <design_example_dir> ).
  9. Click OK.