Intel® Stratix® 10 10GBASE-KR PHY IP Core User Guide

ID 683500
Date 1/29/2021
Public
Document Table of Contents

2.5.4. Adding the Intel® Stratix® 10 Transceiver PHY Reset Controller

You must add an Intel® Stratix® 10 Transceiver PHY Reset Controller IP core to your design, and connect it to the Intel® Stratix® 10 10GBASE-KR PHY IP core reset signals. This block implements a reset sequence that resets the device transceiver correctly.
You can use the IP Catalog to create a transceiver PHY reset controller. In the Intel® Stratix® 10 Transceiver PHY Reset Controller IP parameter editor, you must perform the following for compatibility with the 10GBASE-KR PHY IP core:
  • Select the RX digital reset mode to Manual if auto-negotiation mode is enabled.

Did you find the information on this page useful?

Characters remaining:

Feedback Message