1. Intel Agilex® 7 Power Management Overview 2. Intel Agilex® 7 Power Basics 3. Intel Agilex® 7 Power and I/O State Sequencing 4. Intel Agilex® 7 Sensor Monitoring System 5. Intel Agilex® 7 Power Optimization Techniques and Features 6. Document Revision History for the Intel Agilex® 7 Power Management User Guide
4.3.1. Voltage Monitor Design Guidelines 4.3.2. Temperature Monitor Design Guidelines 4.3.3. Transceiver Tile Local Temperature Sensor Design Guidelines 4.3.4. Guidelines: Calibrate Temperature Sensing Chip Interfacing the Intel Agilex® 7 Remote TSD 4.3.5. Guidelines: Reading the R-Tile Local Temperature Sensor
1. Intel Agilex® 7 Power Management Overview
The Intel Agilex® 7 devices offer smart voltage identification (SmartVID) standard power devices in all speed grades. Fixed-voltage devices are also available, but only in –4 speed grade. All SmartVID standard power devices must be driven by the Power Management BUS (PMBus*)-compliant voltage regulator, operating either in the PMBus master or PMBus slave mode.
This user guide describes the power-optimizing features of the Intel Agilex® 7 devices, and the power-up and power-down sequencing requirements for the Intel Agilex® 7 devices.
Note: Device support for Intel Agilex® 7 M-Series FPGAs and SoCs in the Intel® Quartus® Prime Pro Edition software version 23.1 is restricted. To enable M-Series device support in your instance of the Intel® Quartus® Prime Pro Edition software, contact your regional Intel® FPGA sales representative.
Power System Design Phases
Did you find the information on this page useful?