Intel® SoC FPGA Embedded Development Suite User Guide

ID 683187
Date 8/07/2020
Public
Download
Document Table of Contents

3.1. Linux*

Information about starting the embedded command shell, Arm* DS* shell, and Arm* DS* Eclipse for Linux*.

Starting Embedded Command Shell

For Intel® Quartus® Prime Pro Edition software version 20.1:
~/intelFPGA_pro/20.1/embedded/embedded_command_shell.sh
For Intel® Quartus® Prime Standard Edition software version 20.1:
~/intelFPGA/20.1/embedded/embedded_command_shell.sh

Starting Arm* DS* Shell

1. Start an Embedded Command Shell.

For Intel® Quartus® Prime Pro Edition software version 20.1:
~/intelFPGA_pro/20.1/embedded/embedded_command_shell.sh
For Intel® Quartus® Prime Standard Edition software version 20.1:
~/intelFPGA/20.1/embedded/embedded_command_shell.sh
2a. If Arm* Compiler 5 is desired:
/opt/arm/developmentstudio-2020.0/bin/suite_exec -t "Arm Compiler 5" bash
2b. If Arm* Compiler 6 is desired (only needed by the Intel® Quartus® Prime Pro Edition software version 20.1
/opt/arm/developmentstudio-2020.0/bin/suite_exec -t "Arm Compiler 6" bash

Starting Arm* DS* Eclipse

  1. Start an Embedded Command Shell.
  2. Start an Arm* DS* Shell with the desired compiler selected.
  3. Run the armds_ide command.
    Helpful parameters for armds_ide command are:
    • -nosplash: speeds up loading by not displaying the splash screen
    • -data <workspace-name>: allows the workspace folder to be specified