Cyclone V Device Datasheet

ID 683801
Date 11/27/2019
Public
Document Table of Contents

FPGA JTAG Configuration Timing

Table 56.  FPGA JTAG Timing Parameters and Values for Cyclone® V Devices
Symbol Description Min Max Unit
tJCP TCK clock period 30, 16775 ns
tJCH TCK clock high time 14 ns
tJCL TCK clock low time 14 ns
tJPSU (TDI) TDI JTAG port setup time 1 ns
tJPSU (TMS) TMS JTAG port setup time 3 ns
tJPH JTAG port hold time 5 ns
tJPCO JTAG port clock to output 11 76 ns
tJPZX JTAG port high impedance to valid output 1476 ns
tJPXZ JTAG port valid output to high impedance 1476 ns
75 The minimum TCK clock period is 167 ns if VCCBAT is within the range 1.2 V – 1.5 V when you perform the volatile key programming.
76 A 1-ns adder is required for each VCCIO voltage step down from 3.0 V. For example, tJPCO= 13 ns if VCCIO of the TDO I/O bank = 2.5 V, or 14 ns if it equals 1.8 V.

Did you find the information on this page useful?

Characters remaining:

Feedback Message