AN 661: Implementing Fractional PLL Reconfiguration with Altera PLL and Altera PLL Reconfig IP Cores

Download PDF
ID 683640
Date 10/14/2019
Public
Document Table of Contents
Document Table of Contents x
1. Implementing Fractional PLL Reconfiguration with Altera PLL and Altera PLL Reconfig IP Cores
1. Implementing Fractional PLL Reconfiguration with Altera PLL and Altera PLL Reconfig IP Cores x
1.1. Fractional PLL Reconfiguration in 28-nm Devices 1.2. Fractional PLL Dynamic Phase Shifting in the Intel® Quartus® Prime Software 1.3. Design Considerations 1.4. Using the Design Examples 1.5. Tutorial Walkthrough 1.6. Document Revision History for AN 661: Implementing Fractional PLL Reconfiguration with Altera PLL and Altera PLL Reconfig IP Cores
1.1. Fractional PLL Reconfiguration in 28-nm Devices x
1.1.1. Implementing Fractional PLL Reconfiguration on 28-nm Devices Using the Intel® Quartus® Prime Software
1.1.1. Implementing Fractional PLL Reconfiguration on 28-nm Devices Using the Intel® Quartus® Prime Software x
1.1.1.1. Connectivity between Altera PLL and Altera PLL Reconfig IP Cores 1.1.1.2. Connecting Altera PLL and Altera PLL Reconfig IP Cores 1.1.1.3. Avalon-MM Signals in Altera PLL Reconfig IP Core 1.1.1.4. Registers and Counters Settings 1.1.1.5. Reconfiguring Fractional PLL Settings with Avalon-MM Interface 1.1.1.6. .mif Streaming Reconfiguration
1.1.1.4. Registers and Counters Settings x
1.1.1.4.1. Fractional PLL Dynamic Reconfiguration Registers and Settings 1.1.1.4.2. Counter Address and Bit Setting During Read Operation 1.1.1.4.3. Dynamic Phase Shift Counter and cnt_select (Dynamic_Phase_Shift[20:16]) Bit Setting
1.1.1.5. Reconfiguring Fractional PLL Settings with Avalon-MM Interface x
1.1.1.5.1. Waveform Example for Dynamic Reconfiguration with Avalon-MM Interface
1.1.1.6. .mif Streaming Reconfiguration x
1.1.1.6.1. Stitching Two .mif Files Generated by the Intel® Quartus® Prime Software 1.1.1.6.2. .mif Streaming Reconfiguration with Altera PLL Reconfig IP Core 1.1.1.6.3. .mif File Format 1.1.1.6.4. .mif Streaming Reconfiguration Operation Codes
1.2. Fractional PLL Dynamic Phase Shifting in the Intel® Quartus® Prime Software x
1.2.1. Performing Dynamic Phase Shifting with Altera PLL IP Core 1.2.2. Performing Dynamic Phase Shifting with Altera PLL Reconfig IP Core
1.2.1. Performing Dynamic Phase Shifting with Altera PLL IP Core x
1.2.1.1. Waveform Example for Dynamic Phase Shift with Altera PLL IP Core 1.2.1.2. Dynamic Phase Shift Signals in Altera PLL IP Core 1.2.1.3. Logical Counter Bit Setting
1.2.2. Performing Dynamic Phase Shifting with Altera PLL Reconfig IP Core x
1.2.2.1. Waveform Example for Dynamic Phase Shift with Altera PLL Reconfig IP Core
1.4. Using the Design Examples x
1.4.1. Software Requirement 1.4.2. Design Example 1: PLL Reconfiguration with Altera PLL Reconfig IP Core to Reconfigure M, N, and C Counters 1.4.3. Design Example 2: PLL Reconfiguration with Altera PLL Reconfig IP Core to Perform Dynamic Phase Shift 1.4.4. Design Example 3: PLL Reconfiguration with Altera PLL Reconfig IP Core using Qsys Design Flow 1.4.5. Design Example 4: Dynamic Phase Shift with Altera PLL IP Core 1.4.6. Design Example 5: .mif Streaming Reconfiguration
1.4.4. Design Example 3: PLL Reconfiguration with Altera PLL Reconfig IP Core using Qsys Design Flow x
1.4.4.1. Qsys System and Components 1.4.4.2. Main Menu Commands in Qsys 1.4.4.3. Submenu Commands in Qsys
1.5. Tutorial Walkthrough x
1.5.1. Creating a New Intel® Quartus® Prime Project 1.5.2. Creating the Qsys System 1.5.3. Creating the Top-Level Design File 1.5.4. Incorporating the Nios II SBT for Eclipse 1.5.5. Verifying Design on Hardware
1.5.4. Incorporating the Nios II SBT for Eclipse x
1.5.4.1. Adding Test Code to the Nios II SBT for Eclipse 1.5.4.2. Setting Up the Nios II Project Settings
1.5.5. Verifying Design on Hardware x
1.5.5.1. Compiling the Project 1.5.5.2. Downloading the Object File 1.5.5.3. Verifying Design with the Nios II SBT for Eclipse
1. Implementing Fractional PLL Reconfiguration with Altera PLL and Altera PLL Reconfig IP Cores

1.4.4.2. Main Menu Commands in Qsys

Table 8.  Main Menu Commands in Qsys
Command Description
Switch A This command reconfigures the M counter to 26 (high_count = 13, low_count = 13).
Switch B This command reconfigures the N counter to 4 (high_count = 2, low_count = 2).
Switch C This command reconfigures the C0 to 16 with 62.5% duty cycle (high_count = 10, low_count = 6).
Switch D This command reconfigures the C1 to 20 with 30% duty cycle (high_count = 6, low_count = 14).
Switch E This command reconfigures the K counter to MFRAC= 0.375.
Switch F This command performs dynamic phase shift on C0 for three steps forward.
Switch G This command performs dynamic phase shift on C1 for seven steps backward.
Switch H This command reconfigures the M counter and MFRAC value to 68.75, N counters to 4 and C0 to 8 (with 37.5% duty cycle).
Switch I This command enters submenu to readback register bit. For the commands in the submenu, refer to the Submenu Commands in Qsys table.
Related Information
Level Two Title