Intel® Stratix® 10 Device Family Pin Connection Guidelines

Download
ID 683028
Date 6/25/2022
Public
Document Table of Contents

Temperature Sensor Pins

Note: Intel recommends that you create an Intel® Quartus® Prime design, enter your device I/O assignments, and compile the design. The Intel® Quartus® Prime software will check your pin connections according to I/O assignment and placement rules. The rules differ from one device to another based on device density, package, I/O assignments, voltage assignments, and other factors that are not fully described in this document or the device handbook.
Table 9.  Temperature Sensor Pins
Pin Name ( Intel® Stratix® 10 Devices) Pin Name ( Intel® Stratix® 10 GX 10M Device) Pin Functions Pin Description Connection Guidelines
TEMPDIODEp[0..6]

F[1,2]_TEMPDIODE0p

T[1,3]_TEMPDIODE1p

T[2,4]_TEMPDIODE4p

Input These pins connect to the internal temperature sensing diodes in the FPGA core and in the transceiver tiles (bias-high input).

Connect this pin to an external temperature sensing device to allow sensing of the FPGA's temperature. If you do not use the temperature sensing diode with an external temperature sensing device, leave this pin unconnected.

For more information about the locations and channel numbers of the temperature sensors, refer to the Intel® Stratix® 10 Analog to Digital Converter User Guide.

TEMPDIODEn[0..6]

F[1,2]_TEMPDIODE0n

T[1,3]_TEMPDIODE1n

T[2,4]_TEMPDIODE4n

Input These pins connect to the internal temperature sensing diodes in the FPGA core and in the transceiver tiles (bias-low input).

Connect this pin to an external temperature sensing device to allow sensing of the FPGA's temperature. If you do not use the temperature sensing diode with an external temperature sensing device, leave this pin unconnected.

For more information about the locations and channel numbers of the temperature sensors, refer to the Intel® Stratix® 10 Analog to Digital Converter User Guide.

Did you find the information on this page useful?

Characters remaining:

Feedback Message