F-Tile Architecture and PMA and FEC Direct PHY IP User Guide

ID 683872
Date 1/24/2024

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

2.1.11. Reconfiguration Interfaces

Each EMIB has one datapath Avalon® memory-mapped interface and one PMA Avalon® memory-mapped interface, and each F-tile has one global Avalon® memory-mapped interface.
  • The datapath Avalon® memory-mapped interface can access 400G hard IP (MAC, PCS, and FEC), 200G hard IP (PCS and FEC), EMIBs (both tile and core sides), PMA interfaces, and control and status registers (CSRs) implemented in the FPGA core.
  • The PMA Avalon® memory-mapped interface can access PCIe* hard IP and PMAs.
Figure 9. F-Tile Architecture Building Blocks with Reconfiguration Interfaces
Figure 10. Tile-to-FPGA-Core Interfaces

There is one reconfig_pdp per hard IP instance and one reconfig_xcvr per PMA. reconfig_pdp provides the parallel datapath interface of both 400G hard IP and 200G hard IP access to the datapath Avalon® memory-mapped interface. reconfig_pdp is specific to Direct PHY IP. Other interfaces may use different naming. Ethernet, for example, uses reconfig_eth.