F-Tile Architecture and PMA and FEC Direct PHY IP User Guide

ID 683872
Date 1/24/2024
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.4.6. TX PMA Control Signals

Table 49.  TX PMA Control SignalsRefer to Variables Defining Bits for the Interfacing Ports in Port and Signal Reference for variable definitions.
Signal Name Clock Domain/Resets Direction Description
fgt_tx_beacon[N-1:0] asynchronous input

1'b1: enable SATA beacon signal.

1'b0: disable SATA beacon signal.

fgt_tx_pma_elecidle[(3*x-1:0)] tx_coreclkin tx_reset input When the FGT PMA configuration rules parameter is set to SATA and Enable simplified TX data interface parameter is enabled, this port is available as a separate 4-bit bus. When asserted, the FGT PMA transmitter is forced into an electrical idle condition.
  • 4'b0000: FGT TX is not in electrical idle mode.
  • 4'b1111: FGT TX enters electrical idle mode.