Cyclone® V SX, ST and SE SoC Device Errata

ID 683618
Date 9/25/2015
Public
Document Table of Contents
Give Feedback

1.1.2.4. Configuration via Protocol (CvP)

Description

The fix for this issue requires a new die revision. Use the die revision character in the Date Code (printed on the top side of the device) to determine if the device supports CvP. The CvP update can only be used at Gen1 data rates.

CvP is supported if the fourth alphanumeric character from the left (“Z” in Figure below) is equal to, or later in the alphabet than the letter in the "Revision with Fix" column of the table shown in the "Status" section below.

Figure 4.  Intel Date Code Marking FormatThis figure explains the date code and revision marking format.

Status

Affects: Cyclone® V SX, ST, and SE devices, except for 5CSXC2 and 5CSXC4

Status: Devices that are CvP capable will be available in Q2 2013

The table below shows the revisions which revisions will have the fix.

Table 6.  Device and Die Revisions
Note: Future revisions beyond the one listed in the "Revision with Fix" column will be CvP capable.
Member Code Revisions without Fix Revision with Fix
5CSXC2 None A
5CSXC4 None A
5CSXC5 A B
5CSXC6 A B
5CSTD5 A B
5CSTD6 A B
Note: For Gen2 CvP updates or further inquiries, please contact Intel® Premier Support.