184.108.40.206. R-Tile Information
- All the information in the R-Tile information tab is read-only.
- Use the Refresh button to read the settings.
|Intel Vendor ID||0x1172||Indicates the Vendor ID as set in the IP Parameter Editor.|
|Device ID||x0||This is a unique identifier for the device that is assigned by the vendor.|
|Protocol||PCIe||Indicates the protocol.|
|Port Type||Native Endpoint||Indicates the Hard IP Port type.|
|Intel IP Type||intel_rtile_pcie_ast||Indicates the IP type used.|
|Advertised Speed||8.0GT, 16.0GT, 32.0GT||Indicates the advertised speed as configured in the IP Parameter Editor.|
|Advertised Width||x16, x8, x4||Indicates the advertised width as configured in the IP Parameter Editor.|
|Negotiated Speed||2.5GT, 5.0GT, 8.0GT, 16.0GT, 32.0GT||Indicates the negotiated speed during link training.|
|Negotiated Width||x16, x8, x4, x2, x1||Indicates the negotiated link width during link training.|
|Retimer 1||Detected, Not Detected||Indicates if a retimer was detected between R-tile and the link partner.|
|Retimer 2||Detected, Not Detected||Indicates if a retimer was detected between R-tile and the link partner.|
|Lane Reversal||True, False||Indicates if lane reversal happens on the link.|
|Link Status||Link up, Link Down||Indicates if the link (DL) is up or not.|
|LTSSM State||Refer to Hard IP Status Interface.||Indicates the current state of the link.|
|Tx TLP Sequence Number||Hexadecimal value||Indicates the next transmit sequence number for the transmit TLP.|
|Tx Ack Sequence Timeout||Hexadecimal value||Indicates the ACK sequence number which is updated by receiving ACK/NAK DLLP.|
|Replay Timer Timeout||Green, Red||
Green: no timeout
|Malformed TLP Status||Green, Red||
Green: no malformed TLP
Red: malformed TLP detected
|First Malformed TLP Error Pointer||
|PIPE PhyStatus||1, 0||
Indicates the PMA and PCS are in reset mode.
1: PMA and PCS are out of reset.
0: PMA and PCS are in reset.
Did you find the information on this page useful?