Intel® Arria® 10 CvP Initialization and Partial Reconfiguration over PCI Express User Guide

ID 683871
Date 9/01/2020
Document Table of Contents

3.5.3. Installing Open Source CvP Driver in Linux System

  1. Download the open source CvP driver from the CvP Driver.
  2. Navigate to the driver directory.
  3. Unzip the driver by typing the following command:
    tar -zxvf .<driver>.tar.bz2
  4. Run the installation by typing the following commands:
    sudo make
    sudo make install
  5. Once the installation completed successfully, it generates the altera_cvp file in the following location: directory/dev/altera_cvp.

Did you find the information on this page useful?

Characters remaining:

Feedback Message