|freeze_csr_status||0x00||Read-Only||Freeze status register.|
|csr_ctrl||0x01||Read or Write||Control register to enable and disable freeze.|
|freeze_illegal_req||0x02||Read or Write||High on any bit indicates an illegal request during the freeze state.|
|freeze_reg_version||0x03||Read-Only||Read-only version register. This register is currently 0xAD000003.|
|31:2||Reserved||N/A||0x0||Reserved bits. Reading these bits always returns zeros.|
Hardware sets this bit to 1 after the PR region returns start_ack to indicate successful start of the persona.
Hardware clears this bit to 0 when the unfreeze_req bit is low.
This bit is 1 when bridges and other PR region outputs release from reset.
Hardware sets this bit to 1 after the PR region returns the stop_ack signal to indicate that the PR region is ready to enter the frozen state
Hardware clears this bit to 0 when the freeze_req bit is low.
This bit is 0 when bridges and other PR region outputs release from reset.
|31:3||Reserved||N/A||0x0||Reserved bits. Reading these bits always returns zeros.|
Write 1 to this bit to request unfreezing the PR region interfaces.
Hardware clears this bit after unfreeze_status is high.
Write 0 to this bit to terminate the unfreeze request.
Do not assert this bit and the freeze_req bit at the same time. If both freeze_req and unfreeze_req assert at the same time, it is an invalid operation.
Write 1 to start resetting the PR persona.
Write 0 to stop resetting the PR persona.
Write 1 to this bit to start freezing the PR region interfaces.
Hardware clears this bit after freeze_status is high.
Write 0 to this bit to terminate the freeze request if the PR region never returns stop_ack after this bit asserts.
Do not assert this bit and the unfreeze_req bit at the same time. Asserting freeze_req and unfreeze_req simultaneously is an invalid operation.
|31:n||Reserved||N/A||0x0||Reserved bits. Reading these bits always returns zeros.|
High on any bit of this bus indicates a read or write issue by a static region master when an Avalon® memory-mapped slave freeze bridge is in the freeze state. Identify which freeze bridge has an illegal request by checking each bit on the bus.
For example, when illegal_request bit 2 is high, an illegal request occurred in the freeze bridge that connects to interface freeze_conduit_in2
This bus triggers the interrupt signal. Write 1 to clear this bit. n is the number of bridges.
|31:0||Version Register||Read-Only||AD000003||This register bit indicates the CSR register version number. Currently the CSR register is version 0xAD000003.|
Did you find the information on this page useful?