Intel® Quartus® Prime Pro Edition User Guide: Debug Tools

ID 683819
Date 12/12/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.1.1. Signal Tap Hardware and Software Requirements

All editions of the Intel® Quartus® Prime design software include the Signal Tap logic analyzer GUI and Signal Tap Logic Analyzer Intel® FPGA IP. The Signal Tap logic analyzer is also available as a stand-alone application.

During data acquisition, the memory blocks in the FPGA device store the captured data, and then transfer the data to the Signal Tap logic analyzer over a JTAG communication cable, such as Intel® FPGA Ethernet Cable or Intel® FPGA Download Cable.

The Signal Tap logic analyzer requires the following hardware and software to perform logic analysis:

  • The Signal Tap logic analyzer included with the Intel® Quartus® Prime software, or the Signal Tap logic analyzer standalone software and standalone Programmer software.
  • An Intel® FPGA download or communications cable.
  • An Intel® development kit, or your own design board with a JTAG connection to the device under test.