List of actions that the logic analyzer performs within a state once a condition is satisfied.
- Each action must end with a semicolon (;).
- If you specify more than one action within an if or an else if clause, you must delimit the action_list with begin and end tokens.
Possible actions include:
Buffer Control Actions
Actions that control the acquisition buffer.
|trigger||Stops the acquisition for the current buffer and ends analysis. This command is required in every flow definition.||
Available only in segmented acquisition mode.Ends acquisition of the current segment. After evaluating this command, the Signal Tap logic analyzer starts acquiring from the next segment. If all segments are written, the logic analyzer overwrites the oldest segment with the latest sample. When a trigger action is evaluated the acquisition stops.
|start_store||Active only in state-based storage qualifier mode. Asserts the write_enable to the Signal Tap acquisition buffer.||
Active only in state-based storage qualifier mode.De-asserts the write_enable signal to the Signal Tap acquisition buffer.
Both trigger and segment_trigger actions accept an optional post-fill_count argument.
State Transition Action
Specifies the next state in the custom state control flow. The syntax is:goto <state_label>;
Did you find the information on this page useful?