1. Intel® Agilex™ SEU Mitigation Overview 2. Intel® Agilex™ CRAM Error Mitigation 3. Secure Device Manager ECC and SmartVID Errors Detection 4. Intel® Agilex™ SEU Mitigation Implementation Guides 5. IP and Software References 6. Intel® Agilex™ SEU Mitigation User Guide Archives 7. Document Revision History for the Intel® Agilex™ SEU Mitigation User Guide
4.6.1. Launching and Setting Up the Fault Injection Debugger 4.6.2. Configuring Your Device using a Software Object File (.sof) 4.6.3. Constraining Regions for Fault Injection 4.6.4. Injecting Errors to Random Locations 4.6.5. Injecting Errors to Specific Locations 4.6.6. Injecting Double Adjacent Errors 4.6.7. Injecting SDM ECC Errors 4.6.8. Analyzing SEU or SDM ECC Errors Using Signal Tap
2.5.1. Fault Injection Debugger
Using the Fault Injection Debugger, you can inject random CRAM bit flips into the Intel® Agilex™ FPGA during system operation. With these simulated SEU strikes, you can test, debug, and refine your design's SEU detection and recovery sequence.
Figure 5. Fault Injection Debugger Overview Block Diagram for Intel® Agilex™ Devices
Features of the Fault Injection Debugger:
- Inject single-bit error to a random location or a specified region.
- Report error information by reading the error message queue.
Note: To use the Fault Injection Debugger, you require a licensed Intel® Quartus® Prime software with the "fault_injection_debugger_tool" feature in the license. To check if you have the feature in your license, from the Intel® Quartus® Prime software menu, select Assignment > Device. Click Device and Pin Options and then navigate to Error Detection CRC. If you can turn on Allow SEU fault injection, then you have the neccesary license to use the Fault Injection Debugger tool.
Did you find the information on this page useful?