AN 773: Drive-On-Chip Design Example for Intel® MAX® 10 Devices

ID 683072
Date 4/22/2021
Public
Document Table of Contents

3.3. Downloading and Installing the Design

The Drive-On-Chip Design Example for Intel® MAX® 10 Devices includes a precompiled .sof in the master_image directory.
  1. Download the relevant design .par file for your development kit and power board from the Intel FPGA Design Store.
  2. Install the relevant design .par file for your development kit and power board.
    Archive file Development Kit Power Board
    DOC_TANDEM_MAX10.par MAX 10 10M50 Tandem Motion-Power
  3. In the Quartus Prime software, click File > New Project Wizard.
  4. Click Next.
  5. Enter the path for your project working directory and enter variant name from the table for the project name.
  6. Click Next.
  7. Select Project Template.
  8. Click Next.
  9. Click Install the design templates.
  10. Browse to select the .par file for the design and browse to the destination directory where you want to install it.
  11. Click OK on the design template installation message.
  12. Select Drive on Chip Design Example.
  13. Click Next.
  14. Click Finish.
    The Intel Quartus Prime software expands the archive and sets up the project, which may take some time.
  15. Click Tools > Compile Design > .

Did you find the information on this page useful?

Characters remaining:

Feedback Message