Intel® Stratix® 10 SoC FPGA Boot User Guide

ID 683847
Date 1/17/2024
Public
Document Table of Contents
Give Feedback

4.7.2.1. Creating Configuration Files from Command Line

The following example creates the RBF file for HPS boot first:
quartus_pfg -c design.sof design.rbf -o hps_path=fsbl.hex -o hps=on
The input and output files for this command are:
  • Input Files:
    • design.sof
    • fsbl.hex
  • Output Files:
    • design.hps.rbf
    • design.core.rbf
The command parameter is listed below:
Table 13.  Command Parameters
Parameter Description
hps_path Location of HPS FSBL file in hex format
hps Set to "on" to enable HPS boot first mode, omit for FPGA configuration first mode