Intel® Stratix® 10 SX SoC Development Kit User Guide

ID 683303
Date 6/02/2023
Document Table of Contents

5.3.2. The GPIO Tab

The GPIO tab allows you to interact with all the general purpose user I/O components on the board. You can read DIP switch settings, turn LEDs on/off and detect presses of push buttons.

Figure 35. The GPIO Tab

The following sections describe the controls on the GPIO tab.

User DIP Switches

The read-only User DIP Switches control displays the current positions of the switches in the user DIP switch bank (SW1). Change the switches on the board to see the graphical display change.

User LEDs

The User LEDs control displays the current state of the User LEDs. Toggle the LED buttons to turn the board LEDs on or off.

Push Buttons

Read-only control displays the current state of the board user push buttons. Press a push button on the board to view the graphical display change accordingly.

Qsys Memory Map

The Qsys memory map control shows the memory map of the bts_config.sof design running on your board. The memory map is visible only when bts_config.sof design is running on the board.