40- and 100-Gbps Ethernet MAC and PHY MegaCore Function User Guide

Download PDF
ID 683114
Date 6/15/2022
Public
Document Table of Contents
Document Table of Contents x
Product Discontinuance Notification 1. About the 40- and 100-Gbps Ethernet MAC and PHY IP Core 2. Getting Started 3. Functional Description 4. Debugging the 40GbE and 100GbE Link A. 40-100GbE IP Core Example Design B. Address Map Changes for the 40-100GbE IP Core v12.0 Release C. 10GBASE-KR Registers D. Additional Information
1. About the 40- and 100-Gbps Ethernet MAC and PHY IP Core x
1.1. 40- and 100-Gbps Ethernet MAC and PHY IP Core Supported Features 1.2. 40-100GbE IP Core Device Family and Speed Grade Support 1.3. IP Core Verification 1.4. Performance and Resource Utilization 1.5. Release Information
1.2. 40-100GbE IP Core Device Family and Speed Grade Support x
1.2.1. Device Family Support 1.2.2. 40-100GbE IP Core Device Speed Grade Support
1.3. IP Core Verification x
1.3.1. Simulation Environment 1.3.2. Hardware Testing
1.4. Performance and Resource Utilization x
1.4.1. Resource Utilization for 40GbE IP Cores 1.4.2. Resource Utilization for 100GbE IP Cores
1.4.2. Resource Utilization for 100GbE IP Cores x
1.4.2.1. Resource Utilization for 100GbE CAUI–4 IP Cores
2. Getting Started x
2.1. Installing and Licensing Intel® FPGA IP Cores 2.2. Specifying the 40-100GbE IP Core Parameters and Options 2.3. IP Core Parameters 2.4. Files Generated for the 40-100GbE IP Core 2.5. Simulating the IP Core 2.6. Integrating Your IP Core in Your Design 2.7. 40-100GbE IP Core Testbenches 2.8. Simulating the 40‑100GbE IP Core With the Testbenches 2.9. Compiling the Full Design and Programming the FPGA 2.10. Initializing the IP Core
2.1. Installing and Licensing Intel® FPGA IP Cores x
2.1.1. Intel® FPGA IP Evaluation Mode
2.6. Integrating Your IP Core in Your Design x
2.6.1. Pin Assignments 2.6.2. External Transceiver Reconfiguration Controller Required in Stratix V Designs 2.6.3. Placement Settings for the 40-100GbE IP Core
2.7. 40-100GbE IP Core Testbenches x
2.7.1. Testbenches with Adapters 2.7.2. Testbenches without Adapters 2.7.3. Understanding the Testbench Behavior
2.8. Simulating the 40‑100GbE IP Core With the Testbenches x
2.8.1. Generating the Testbench 2.8.2. Simulating with the Modelsim Simulator 2.8.3. Simulating with the NCSim Simulator 2.8.4. Simulating with the VCS Simulator 2.8.5. Testbench Output Example: 40GbE IP Core with Adapters 2.8.6. Testbench Output Example: 100GbE IP Core with Adapters
3. Functional Description x
3.1. High Level System Overview 3.2. 40-100GbE MAC and PHY Functional Description 3.3. Signals 3.4. Software Interface: Registers 3.5. Ethernet Glossary
3.2. 40-100GbE MAC and PHY Functional Description x
3.2.1. IP Core TX Datapath 3.2.2. IP Core TX Data Bus Interfaces 3.2.3. 40-100GbE IP Core RX Datapath 3.2.4. IP Core RX Data Bus Interfaces 3.2.5. 40GbE Lower Rate 24.24 Gbps MAC and PHY 3.2.6. 100GbE CAUI–4 PHY 3.2.7. External Reconfiguration Controller 3.2.8. Congestion and Flow Control Using Pause Frames 3.2.9. Pause Control and Generation Interface 3.2.10. Pause Control Frame and Non‑Pause Control Frame Filtering and Forwarding 3.2.11. 40-100GbE IP Core Modes of Operation 3.2.12. Link Fault Signaling Interface 3.2.13. Statistics Counters Interface 3.2.14. MAC – PHY XLGMII or CGMII Interface 3.2.15. Lane to Lane Deskew Interface 3.2.16. PCS Test Pattern Generation and Test Pattern Check 3.2.17. Transceiver PHY Serial Data Interface 3.2.18. 40GBASE-KR4 IP Core Variations 3.2.19. Control and Status Interface 3.2.20. Clocks 3.2.21. Resets
3.2.1. IP Core TX Datapath x
3.2.1.1. Preamble, Start, and SFD Insertion 3.2.1.2. Address Insertion 3.2.1.3. Length/Type Field Processing 3.2.1.4. Frame Padding 3.2.1.5. Frame Check Sequence (CRC-32) Insertion 3.2.1.6. Inter‑Packet Gap Generation and Insertion
3.2.2. IP Core TX Data Bus Interfaces x
3.2.2.1. 40-100GbE IP Core User Interface Data Bus 3.2.2.2. 40-100GbE IP Core TX Data Bus with Adapters (Avalon-ST Interface) 3.2.2.3. 40-100GbE IP Core TX Data Bus Without Adapters (Custom Streaming Interface) 3.2.2.4. Bus Quantization Effects With Adapters 3.2.2.5. User Interface to Ethernet Transmission
3.2.2.5. User Interface to Ethernet Transmission x
3.2.2.5.1. 40GbE IP Core Without Adapters 3.2.2.5.2. 100GbE IP Core Without Adapters 3.2.2.5.3. Order of Transmission
3.2.3. 40-100GbE IP Core RX Datapath x
3.2.3.1. 40-100GbE IP Core RX Filtering 3.2.3.2. 40-100GbE IP Core Preamble Processing 3.2.3.3. 40-100GbE IP Core FCS (CRC-32) Removal 3.2.3.4. 40-100GbE IP Core CRC Checking 3.2.3.5. RX CRC Forwarding 3.2.3.6. RX Automatic Pad Removal Control 3.2.3.7. Address Checking 3.2.3.8. Inter-Packet Gap 3.2.3.9. Pause Ignore
3.2.4. IP Core RX Data Bus Interfaces x
3.2.4.1. 40-100GbE IP Core User Interface Data Bus 3.2.4.2. 40-100GbE IP Core RX Data Bus with Adapters (Avalon-ST Interface) 3.2.4.3. 40-100GbE IP Core RX Data Bus Without Adapters (Custom Streaming Interface) 3.2.4.4. 100GbE IP Core RX Client Interface Examples 3.2.4.5. Error Conditions on the RX Datapath
3.2.8. Congestion and Flow Control Using Pause Frames x
3.2.8.1. Conditions Triggering XOFF Frame Transmission 3.2.8.2. Conditions Triggering XON Frame Transmission 3.2.8.3. Pause Transmission Logic
3.2.14. MAC – PHY XLGMII or CGMII Interface x
3.2.14.1. MAC to PHY Connection Interface
3.2.17. Transceiver PHY Serial Data Interface x
3.2.17.1. PCS BER Monitor
3.2.18. 40GBASE-KR4 IP Core Variations x
3.2.18.1. 40GBASE-KR4 Reconfiguration Interface 3.2.18.2. 40GBASE-KR4 Microprocessor Interface
3.3. Signals x
3.3.1. Signals of MAC and PHY Variations Without Adapters 3.3.2. Signals of MAC and PHY Variations With Adapters 3.3.3. Signals of 40-100GbE MAC‑Only IP Core Variations 3.3.4. Signals of 40-100GbE PHY‑Only IP Core Variations
3.4. Software Interface: Registers x
3.4.1. IP Core Registers 3.4.2. 40‑100GbE Example Design Registers
3.4.1. IP Core Registers x
3.4.1.1. Transceiver PHY Control and Status Registers 3.4.1.2. Lock Status Registers 3.4.1.3. Bit Error Flag Registers 3.4.1.4. PCS Hardware Error Register 3.4.1.5. BER Monitor Register 3.4.1.6. Test Mode Register 3.4.1.7. Test Pattern Counter Register 3.4.1.8. Link Fault Signaling Registers 3.4.1.9. MAC and PHY Reset Registers 3.4.1.10. PCS‑VLANE Registers 3.4.1.11. PRBS Registers 3.4.1.12. 40GBASE-KR4 Registers 3.4.1.13. MAC Configuration and Filter Registers 3.4.1.14. Pause Registers 3.4.1.15. MAC Hardware Error Register 3.4.1.16. CRC Configuration Register 3.4.1.17. MAC Feature Configuration Registers 3.4.1.18. MAC Address Registers 3.4.1.19. Statistics Registers
3.4.2. 40‑100GbE Example Design Registers x
3.4.2.1. PMD Registers 3.4.2.2. MDIO Registers 3.4.2.3. 2‑Wire Serial Interface Registers
C. 10GBASE-KR Registers x
C.1. 10GBASE-KR PHY Register Definitions
D. Additional Information x
D.1. 40- and 100-Gbps Ethernet MAC and PHY MegaCore Function User Guide Revision History D.2. How to Contact Altera D.3. Typographic Conventions
Product Discontinuance Notification
1. About the 40- and 100-Gbps Ethernet MAC and PHY IP Core
2. Getting Started
3. Functional Description
4. Debugging the 40GbE and 100GbE Link
A. 40-100GbE IP Core Example Design
B. Address Map Changes for the 40-100GbE IP Core v12.0 Release
C. 10GBASE-KR Registers
D. Additional Information

3.2.12. Link Fault Signaling Interface

The 40‑100GbE IP core provides link fault signaling as defined in the IEEE 802.3ba-2010 100G Ethernet Standard . The 40GbE and 100GbE MAC include a Reconciliation Sublayer (RS) located between the MAC and the XLGMII or CGMII to manage local and remote faults. Link fault signaling on the Ethernet link is disabled by default but can be enabled by the Enable Link Fault Sequence register. When the LINK_FAULT_CONFIG register bits [1:0] have the value of 2'b01, link fault signaling is enabled in normal bidirectional mode. In this mode enabled, the local RS TX logic can transmit remote fault sequences in case of a local fault and can transmit IDLE control words in case of a remote fault. An additional configuration register (MAC/RS link fault sequence configuration) is provided to select the type of information to be transmitted in case of a local or remote fault. Using the configuration bits, you can send remote fault sequence ordered sets, IDLE control words, or regular traffic in the case of a local or remote fault.

The RS RX logic sets remote_fault_status or local_fault_status to 1 when the RS RX block receives remote fault or local fault sequence ordered sets. When valid data is received in more than 127 columns, the RS RX logic resets the relevant fault status (remote_fault_status or local_fault_status) to 0.

Figure 38. Link Fault Signaling Example

The IEEE standard specifies RS monitoring of RXC<7:0> and RXD<63:0> for Sequence ordered_sets. For more information, refer to Figure 81–9—Link Fault Signaling state diagram and Table 81-5—Sequence ordered_sets in the IEEE 802.3ba 2010 100G Ethernet Standard. The variable link_fault is set to indicate the value of an RX Sequence ordered_set when four fault_sequences containing the same fault value are received with fault sequences separated by less than 128 columns and with no intervening fault_sequences of different fault values. The variable link_fault is set to OK following any interval of 128 columns not containing a remote fault or local fault Sequence ordered_set.

Table 25.  Signals of the Link Fault Signaling Interface

Signal Name

Direction

Description

remote_fault_from_rx

Output

Asserted when remote fault is detected in RX MAC. Available in RX-only variations.

If link fault signaling is disabled, this signal is present but is tied low (always has the value of 0).

local_fault_from_rx

Output

Asserted when local fault is detected in RX MAC. Available in RX-only variations.

If link fault signaling is disabled, this signal is present but is tied low (always has the value of 0).

remote_fault_to_tx

Input

Input to the TX MAC. Asserted when remote fault is detected. Visible in TX-only variations and used internally in duplex IP core variations.

local_fault_to_tx

Input

Input to the TX MAC. Asserted when local fault is detected. Visible in TX-only variations and used internally in duplex IP core variations.

remote_fault_status

Output

Asserted when remote fault is detected in RX MAC in a duplex IP core variation. In duplex IP core variations, remote_fault_from_rx is connected internally to remote_fault_to_tx, and this signal is available externally as remote_fault_status.
local_fault_status

Output

Asserted when local fault is detected in RX MAC in a duplex IP core variation. In duplex IP core variations, local_fault_from_rx is connected internally to local_fault_to_tx, and this signal is available externally as local_fault_status.
Related Information
Level Two Title