40- and 100-Gbps Ethernet MAC and PHY MegaCore Function User Guide

ID 683114
Date 6/15/2022
Public
Document Table of Contents

2.9. Compiling the Full Design and Programming the FPGA

You can use the Start Compilation command on the Processing menu in the Intel® Quartus® Prime software to compile your design. After successfully compiling your design, program the targeted Altera device with the Programmer and verify the design in hardware.

Note: The IP core design example synthesis directories include Synopsys Constraint (.sdc) files that you can copy and modify for your own design.
Note: For additional .sdc file requirements for Intel® Arria® 10 designs, please refer to the KDB Answer at https://www.altera.com/support/support-resources/knowledge-base/tools/2017/fb470823.html.