F-Tile Ethernet Intel® FPGA Hard IP User Guide

ID 683023
Date 3/11/2024
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

7.2.4. Using MAC Avalon ST i_tx_error Signal to Mark Packets Invalid

The i_tx_error port allows packets to be marked as errored when they are complete.
Figure 38. Using i_tx_error

Because the core uses a cut-through interface, the core starts transmitting the packet data it is given as soon as possible. If the core discovers an error after the packet starts, e.g. in a bridging system where the receiver also uses a cut-through interface, you can use i_tx_error to invalidate the packet. You can also use i_tx_error for testing, to generate errored packets, and confirm that the other end of the link is able to reject the errored packets.

To invalidate an errored frame, end it with i_tx_endofpacket and assert i_tx_error. If the frame is good, deassert i_tx_error.

Note: Using i_tx_error does not provide a robust test of the remote CRC, because it uses MII Error Control bytes to indicate error, rather than relying on corrupted CRC bits.