DisplayPort Intel® FPGA IP User Guide

ID 683273
Date 10/20/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.3.4.4. Load and Run the Software

In this step, you load the software into the device and run the software.

  1. In a Windows Command prompt, navigate to the hardware demonstration software directory.
  2. Launch a Nios II command shell. You can launch it using several methods, for example, from the Windows task bar or within the Platform Designer system.
  3. From within the Nios II command shell, execute the following command to program the device, download the Nios II program, and launch a debug terminal:

    bash nios2-configure-sof <project_name>.sof <USB cable number>; nios2-terminal<USB cable number>

    Note: To find <USB cable number>, use the jtagconfig command.
  4. To download the Software .elf file separately, execute the following command in the Nios II command shell:
    bash nios2-download <project_name>.elf