DisplayPort Intel® FPGA IP User Guide

ID 683273
Date 10/20/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

8.1.1. Copy the Simulation Files to Your Working Directory

Copy the simulation example files to your working directory using the command:

cp -r <IP root directory>/altera/altera_dp/sim_example/<device> <working directory>

where <device> is av for Arria V devices, cv for Cyclone V devices, and sv for Stratix V devices.

Your working directory should contain the files shown below.

Table 60.  Simulation Example Files for Arria V, Cyclone V, and Stratix V DevicesFiles are named <prefix>_<name>.<extension> where <prefix> represents the device (av for Arria V devices, cv for Cyclone V devices, and sv for Stratix V devices).

File Type

File

Description

System Verilog HDL design files

<prefix>_dp_harness.sv

Top-level test harness.

Verilog HDL design files

<prefix>_dp_example.v

Design under test (DUT).

dp_mif_mappings.v

Table translating MIF mappings for transceiver reconfiguration.

dp_analog_mappings.v

Table translating VOD and pre-emphasis settings.

reconfig_mgmt_hw_ctrl.v

Reconfiguration manager top-level.

reconfig_mgmt_write.v

Reconfiguration manager FSM for a single write command.

clk_gen.v

Clock generation file.

freq_check.sv

Top-level file for the frequency checker.

rx_freq_check.sv

RX frequency checker.

tx_freq_check.sv

TX frequency checker.

vga_driver.v

VGA driver (generates a test image).

IP Catalog files

<prefix>_ dp.v

IP Catalog variant for the DisplayPort Intel® FPGA IP.

<prefix>_ xcvr_reconfig.v

IP Catalog variant for the transceiver reconfiguration core.

<prefix>_ native_phy_rx.v

IP Catalog variant for the RX transceiver.
<prefix>_ native_phy_tx.v IP Catalog variant for the TX transceiver.

Scripts

runall.sh

This script generates the IP simulation files and scripts, and compiles and simulates them.

msim_dp.tcl

Compiles and simulates the design in the ModelSim* software.

Waveform .do files

all.do

Waveform that shows a combination of all waveforms.

reconfig.do

Waveform that shows the signals involved in reconfiguring the transceiver.

rx_video_out.do

Waveform that shows the rx_video_out signals from the DisplayPort Intel® FPGA IP mapped to the CVI input.

tx_video_in.do

Waveform that shows the tx_vid_v_sync, tx_vid_h_sync, de, tx_vid_de, tx_vid_f, and tx_vid_data[23:0] signals at 256 pixels per line and 8 bpp,

Miscellaneous files

readme.txt

Documentation for the simulation example.

edid_memory.hex

Initial content for the EDID ROM.