F-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide

Download PDF
ID 683140
Date 4/04/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Acronyms 2. Introduction 3. IP Architecture and Functional Description 4. Advanced Features 5. Interfaces 6. Parameters 7. Testbench 8. Troubleshooting/Debugging 9. F-Tile Avalon Streaming Intel FPGA IP for PCI Express User Guide Archives 10. Revision History of the F-Tile Avalon Streaming Intel FPGA IP for PCI Express User Guide A. Configuration Space Registers B. Implementation of Address Translation Services (ATS) in Endpoint Mode C. Packets Forwarded to the User Application in TLP Bypass Mode D. Root Port Enumeration E. Bifurcated Endpoint Support for Independent Resets
2. Introduction x
2.1. Overview 2.2. Features 2.3. Release Information 2.4. Device Family Support 2.5. Resource Utilization 2.6. IP Core and Design Example Support Levels
3. IP Architecture and Functional Description x
3.1. Architecture 3.2. Functional Description 3.3. Avalon-ST TX/RX 3.4. Interrupts 3.5. Completion Timeout 3.6. Hot Plug 3.7. Power Management 3.8. Configuration Output Interface (COI) 3.9. Configuration Intercept Interface (EP Only) 3.10. Hard IP Reconfiguration Interface 3.11. PHY Reconfiguration Interface 3.12. Page Request Service (PRS) (EP Only)
3.1. Architecture x
3.1.1. Clocks 3.1.2. Refclk 3.1.3. Reset
3.2. Functional Description x
3.2.1. PMA/PCS 3.2.2. Data Link Layer 3.2.3. Transaction Layer
3.3. Avalon-ST TX/RX x
3.3.1. TLP Header and Data Alignment 3.3.2. Avalon-ST RX 3.3.3. Avalon-ST TX 3.3.4. Tag Allocation 3.3.5. Completion Buffer Size
3.3.2. Avalon-ST RX x
3.3.2.1. RX Flow Control
3.3.3. Avalon-ST TX x
3.3.3.1. TX Flow Control
3.4. Interrupts x
3.4.1. Legacy Interrupts 3.4.2. MSI 3.4.3. MSI-X
3.10. Hard IP Reconfiguration Interface x
3.10.1. Configuration Registers Access
3.10.1. Configuration Registers Access x
3.10.1.1. Direct User Avalon-MM Interface (Byte Access) 3.10.1.2. Debug Register Interface Access (Dword Access)
4. Advanced Features x
4.1. Virtualization Support 4.2. TLP Bypass Mode 4.3. Precision Time Measurement (PTM) 4.4. Scalable IOV
4.1. Virtualization Support x
4.1.1. Single Root I/O Virtualization (SR-IOV) 4.1.2. VirtIO
4.1.1. Single Root I/O Virtualization (SR-IOV) x
4.1.1.1. SR-IOV Implementation
4.1.1.1. SR-IOV Implementation x
4.1.1.1.1. Functional Level Reset (FLR)
4.1.2. VirtIO x
4.1.2.1. VirtIO Implementation 4.1.2.2. VirtIO Registers
4.2. TLP Bypass Mode x
4.2.1. Register Settings for TLP Bypass mode 4.2.2. Avalon-MM usage for TLP Bypass Mode 4.2.3. Transmit Interface 4.2.4. Receive Interface 4.2.5. Configuration TLP 4.2.6. Malformed TLP 4.2.7. ECRC
4.2.1. Register Settings for TLP Bypass mode x
4.2.1.1. TLPBYPASS_ERR_EN (Address 0x14194) 4.2.1.2. TLPBYPASS_ERR_STATUS (Address 0x14190)
5. Interfaces x
5.1. Overview 5.2. Clocks and Resets 5.3. Serial Data Interface 5.4. Avalon-ST Interface 5.5. Interrupt Interface 5.6. Hard IP Status Interface 5.7. Error Interface 5.8. 10-bit Tag Support Interface 5.9. Completion Timeout Interface 5.10. Power Management Interface 5.11. Hot Plug Interface (RP Only) 5.12. Configuration Output Interface 5.13. Configuration Intercept Interface (EP Only) 5.14. Hard IP Reconfiguration Interface 5.15. PHY Reconfiguration Interface 5.16. Page Request Service (PRS) Interface (EP Only) 5.17. FLR Interface Signals 5.18. PTM Interface Signals 5.19. VF Error Flag Interface Signals 5.20. VirtIO PCI Configuration Access Interface Signals
5.4. Avalon-ST Interface x
5.4.1. Avalon-ST RX Interface Signals 5.4.2. Avalon-ST TX Interface Signals
5.5. Interrupt Interface x
5.5.1. Legacy Interrupt Interface Signals 5.5.2. MSI Pending Bits Interface Signals
6. Parameters x
6.1. Top-Level Settings 6.2. Core Parameters
6.2. Core Parameters x
6.2.1. Avalon Parameters 6.2.2. Base Address Registers 6.2.3. PCI Express and PCI Capabilities Parameters 6.2.4. Device Identification Registers 6.2.5. Configuration, Debug and Extension Options
6.2.3. PCI Express and PCI Capabilities Parameters x
6.2.3.1. Device Capabilities 6.2.3.2. Link Capabilities 6.2.3.3. Legacy Interrupt Pin Register 6.2.3.4. MSI Capabilities 6.2.3.5. MSI-X Capabilities 6.2.3.6. Slot Capabilities 6.2.3.7. Latency Tolerance Reporting (LTR) 6.2.3.8. Process Address Space ID (PASID) 6.2.3.9. Device Serial Number Capability 6.2.3.10. Page Request Service (PRS) 6.2.3.11. Access Control Service (ACS) Capabilities 6.2.3.12. Power Management 6.2.3.13. Vendor Specific Extended Capability (VSEC) Registers 6.2.3.14. Precision Time Measurement (PTM) 6.2.3.15. Address Translation Services (ATS) 6.2.3.16. TLP Processing Hints (TPH) 6.2.3.17. VirtIO Parameters
7. Testbench x
7.1. Generating Tile Files 7.2. Endpoint Testbench 7.3. Test Driver Module 7.4. Root Port BFM 7.5. BFM Procedures and Functions
7.4. Root Port BFM x
7.4.1. BFM Memory Map 7.4.2. Configuration Space Bus and Device Numbering 7.4.3. Configuration of Root Port and Endpoint 7.4.4. Issuing Read and Write Transactions to the Application Layer
7.5. BFM Procedures and Functions x
7.5.1. ebfm_barwr Procedure 7.5.2. ebfm_barwr_imm Procedure 7.5.3. ebfm_barrd_wait Procedure 7.5.4. ebfm_barrd_nowt Procedure 7.5.5. ebfm_cfgwr_imm_wait Procedure 7.5.6. ebfm_cfgwr_imm_nowt Procedure 7.5.7. ebfm_cfgrd_wait Procedure 7.5.8. ebfm_cfgrd_nowt Procedure 7.5.9. BFM Configuration Procedures 7.5.10. BFM Shared Memory Access Procedures 7.5.11. BFM Log and Message Procedures 7.5.12. Verilog HDL Formatting Functions
7.5.9. BFM Configuration Procedures x
7.5.9.1. ebfm_cfg_rp_ep Procedure 7.5.9.2. ebfm_cfg_decode_bar Procedure
7.5.10. BFM Shared Memory Access Procedures x
7.5.10.1. Shared Memory Constants 7.5.10.2. shmem_write Task 7.5.10.3. shmem_read Function 7.5.10.4. shmem_display Verilog HDL Function 7.5.10.5. shmem_fill Procedure 7.5.10.6. shmem_chk_ok Function
7.5.11. BFM Log and Message Procedures x
7.5.11.1. ebfm_display Verilog HDL Function 7.5.11.2. ebfm_log_stop_sim Verilog HDL Function 7.5.11.3. ebfm_log_set_suppressed_msg_mask Task 7.5.11.4. ebfm_log_set_stop_on_msg_mask Verilog HDL Task 7.5.11.5. ebfm_log_open Verilog HDL Function 7.5.11.6. ebfm_log_close Verilog HDL Function
7.5.12. Verilog HDL Formatting Functions x
7.5.12.1. himage1 7.5.12.2. himage2 7.5.12.3. himage4 7.5.12.4. himage8 7.5.12.5. himage16 7.5.12.6. dimage1 7.5.12.7. dimage2 7.5.12.8. dimage3 7.5.12.9. dimage4 7.5.12.10. dimage5 7.5.12.11. dimage6 7.5.12.12. dimage7
8. Troubleshooting/Debugging x
8.1. Hardware 8.2. Debug Toolkit
8.1. Hardware x
8.1.1. Debugging Link Training Issues 8.1.2. Debugging Data Transfer and Performance Issues
8.1.1. Debugging Link Training Issues x
8.1.1.1. Generic Tools and Utilities 8.1.1.2. SignalTapII Logic Analyzer 8.1.1.3. Additional Debug Tools
8.1.1.3. Additional Debug Tools x
8.1.1.3.1. Using the Hard IP Reconfiguration Interface 8.1.1.3.2. Enable and Read LCRC and ECRC Error Count
8.1.2. Debugging Data Transfer and Performance Issues x
8.1.2.1. Advanced Error Reporting (AER) 8.1.2.2. Second-Level Debug Tools
8.2. Debug Toolkit x
8.2.1. Overview 8.2.2. Enabling the F-Tile Debug Toolkit 8.2.3. Launching the F-Tile Debug Toolkit 8.2.4. Using the F-Tile Debug Toolkit 8.2.5. Using the F-Tile Link Inspector
8.2.4. Using the F-Tile Debug Toolkit x
8.2.4.1. Main View 8.2.4.2. Toolkit Parameters 8.2.4.3. Channel Parameters 8.2.4.4. Eye Viewer
8.2.4.2. Toolkit Parameters x
8.2.4.2.1. F-Tile Information 8.2.4.2.2. Event Counter 8.2.4.2.3. P0/P1 Configuration Space
8.2.4.3. Channel Parameters x
8.2.4.3.1. General PHY 8.2.4.3.2. TX Path 8.2.4.3.3. RX Path
A. Configuration Space Registers x
A.1. Configuration Space Registers A.2. Configuration Space Registers for Virtualization A.3. Intel-Defined VSEC Capability Registers
A.1. Configuration Space Registers x
A.1.1. Register Access Definitions A.1.2. PCIe Configuration Header Registers A.1.3. PCI Express Capability Structures A.1.4. Physical Layer 16.0 GT/s Extended Capability Structure A.1.5. MSI-X Registers
A.2. Configuration Space Registers for Virtualization x
A.2.1. SR-IOV Virtualization Extended Capabilities Registers Address Map A.2.2. PCIe Configuration Registers for Each Virtual Function
A.2.2. PCIe Configuration Registers for Each Virtual Function x
A.2.2.1. Alternative Routing ID (ARI) Capability Structure A.2.2.2. TLP Processing Hint (TPH) Capability Structure A.2.2.3. Address Translation Services (ATS) Capability Structure A.2.2.4. Access Control Services (ACS) Capability Structure
A.2.2.1. Alternative Routing ID (ARI) Capability Structure x
A.2.2.1.1. ARI Enhanced Capability Header Register (Offset 0x0) A.2.2.1.2. ARI Capability and Control Register (Offset 0x4)
A.2.2.2. TLP Processing Hint (TPH) Capability Structure x
A.2.2.2.1. TPH Requester Enhanced Capability Header (Offset 0x0) A.2.2.2.2. TPH Requester Capability Register (Offset 0x4) A.2.2.2.3. TPH Requester Control Register (Offset 0x8)
A.2.2.3. Address Translation Services (ATS) Capability Structure x
A.2.2.3.1. ATS Enhanced Capability Header (Offset 0x0) A.2.2.3.2. ATS Capability Register and ATS Control Register (Offset 0x4)
A.2.2.4. Access Control Services (ACS) Capability Structure x
A.2.2.4.1. ACS Extended Capability Header (Offset 0x0) A.2.2.4.2. ACS Capability Register (Offset 0x4) A.2.2.4.3. ACS Control Register (Offset 0x6) A.2.2.4.4. Egress Control Vector (Offset 0x8)
A.3. Intel-Defined VSEC Capability Registers x
A.3.1. Intel-Defined VSEC Capability Header (Offset 00h) A.3.2. Intel-Defined Vendor Specific Header (Offset 04h) A.3.3. Intel Marker (Offset 08h) A.3.4. JTAG Silicon ID (Offset 0x0C - 0x18) A.3.5. User Configurable Device and Board ID (Offset 0x1C - 0x1D) A.3.6. General Purpose Control and Status Register (Offset 0x30) A.3.7. Uncorrectable Internal Error Status Register (Offset 0x34) A.3.8. Uncorrectable Internal Error Mask Register (Offset 0x38) A.3.9. Correctable Internal Error Status Register (Offset 0x3C) A.3.10. Correctable Internal Error Mask Register (Offset 0x40)
B. Implementation of Address Translation Services (ATS) in Endpoint Mode x
B.1. Sending Translated/Untranslated Requests B.2. Sending a Page Request Message from the Endpoint (EP) to the Root Complex (RC) B.3. Invalidating Requests/Completions
C. Packets Forwarded to the User Application in TLP Bypass Mode x
C.1. EP TLP Bypass Mode (Upstream) C.2. RC TLP Bypass Mode (Downstream)
E. Bifurcated Endpoint Support for Independent Resets x
E.1. PCI Express Resets E.2. Supported Configurations
E.2. Supported Configurations x
E.2.1. Configuration Type A E.2.2. Configuration Type B E.2.3. Configuration Type C
1. Acronyms
2. Introduction
3. IP Architecture and Functional Description
4. Advanced Features
5. Interfaces
6. Parameters
7. Testbench
8. Troubleshooting/Debugging
9. F-Tile Avalon Streaming Intel FPGA IP for PCI Express User Guide Archives
10. Revision History of the F-Tile Avalon Streaming Intel FPGA IP for PCI Express User Guide
A. Configuration Space Registers
B. Implementation of Address Translation Services (ATS) in Endpoint Mode
C. Packets Forwarded to the User Application in TLP Bypass Mode
D. Root Port Enumeration
E. Bifurcated Endpoint Support for Independent Resets

D. Root Port Enumeration

This chapter provides a flow chart that explains the Root Port enumeration process. The goal of enumeration is to find all connected devices in the system and for each connected device, set the necessary registers and make address range assignments.

At the end of the enumeration process, the Root Port (RP) must set the following registers:
  • Primary Bus, Secondary Bus and Subordinate Bus numbers
  • Memory Base and Limit
  • I/O Base and I/O Limit
  • Maximum Payload Size
  • Memory Space Enable bit
The Endpoint (EP) must also have the following registers set by the RP:
  • Master Enable bit
  • BAR Address
  • Maximum Payload Size
  • Memory Space Enable bit
  • Severity bit

The figure below shows an example tree of connected devices on which the following flow chart will be based.

Figure 91. Tree of Connected Devices in Example System
Figure 92. Root Port Enumeration Flow Chart
Figure 93. Root Port Enumeration Flow Chart [Continued]
Figure 94. Root Port Enumeration Flow Chart [Continued]
  1. Vendor ID and Device ID information is located at offset 0x00h for both HeaderType 0 and Header Type 1.
  2. For PCIe Gen4, the Header Type is located at offset 0x0Eh (2nd DW). If bit 0 is setto 1, it indicates the device is a Bridge; otherwise, it is an EP. If bit 7 is set to 0, it indicates this is a single-function device; otherwise, it is a multi-function device.
  3. List of capability registers for RP and non-RP devices: 0x34h – Capabilities Pointers. This register is used to point to a linked list of capabilities implemented by a Function.
    • Capabilities Pointer for RP:
      • Address 60 - Identifies the Power Management Capability ID
      • Address 6c - Identifies MSI Capability ID
      • Address b4 - Identifies the PCI Express Capability structure
    • Capabilities Pointer for non-RP:
      • Address 40 - Identifies Power Management Capability ID
      • Address 48 - Identifies the PCI Express Capability structure
  4. EP does not have an associated register of Primary, Secondary and SubordinateBus numbers.
  5. Bridge/Switch IO Base and Limit register offset 0x1Ch. These registers are set perthe PCIe 4.0 Base Specification. For more accurate information and flow, refer to chapter 7.5.1.3.6 of the Base Specification.
  6. For EP Type 0 header, BAR addresses are located at the following offsets:
    • 0x10h – Base Address 0
    • 0x14h – Base Address 1
    • 0x18h – Base Address 2
    • 0x1ch – Base Address 3
    • 0x20h – Base Address 4
    • 0x24h – Base Address 5
  7. For Bridge/Switch Type 1 header, BAR addresses are located at the following offsets:
    • 0x10h – Base Address 0
    • 0x14h – Base Address 1
  8. For Bridge/Switch Type 1 header, IO Base and IO limit registers are located at offset 0x1Ch.
  9. For Bridge/Switch Type 1 header, Non-Prefetchable Memory Base and Limitregisters are located at offset 0x20h.
  10. For Bridge/Switch Type 1 header, Prefetchable Memory Base and Limit registersare located at offset 0x24h.
  11. For Bridge/Switch/EP Type 0 & 1 headers, the Bus Master Enable bit is located at offset 0x04h (Command Register) bit 2.
  12. For Bridge/Switch/EP Type 0 & 1 headers:
    • I/O Space Enable bit is located at offset 0x04h (Command Register) bit 0.
    • Memory Space Enable bit is located at offset 0x04h (Command Register) bit 1.
    • Bus Master Enable bit is located at offset 0x04h (Command Register) bit 2.
    • Parity Error Response bit is located at offset 0x04h (Command Register) bit 6.
    • SERR# Enable bit is located at offset 0x04h (Command Register) bit 8.
    • Interrupt Disable bit is located at offset 0x04h (Command Register) bit 10.
Level Two Title