Intel® Quartus® Prime Pro Edition User Guide: PCB Design Tools

ID 683768
Date 11/04/2020
Public
Document Table of Contents

1.3.1. Create I/O and Board Trace Model Assignments

You can configure a board trace model for output signals or for bidirectional signals in output mode. You can then automatically transfer its description to HSPICE decks generated by the HSPICE Writer. This helps improve simulation accuracy.

To configure a board trace model, in the Settings dialog box, in the Timing Analyzer page, turn on the Enable Advanced I/O Timing option and configure the board trace model assignment settings for each I/O standard used in your design. You can add series or parallel termination, specify the transmission line length, and set the value of the far-end capacitive load. You can configure these parameters either in the Board Trace Model view of the Pin Planner, or click Assignments > Device > Device and Pin Options.

The Intel® Quartus® Prime software can generate IBIS models and HSPICE decks without having to configure a board trace model with the Enable Advanced I/O Timing option. In fact, IBIS models ignore any board trace model settings other than the far-end capacitive load. If any load value is set other than the default, the delay given by IBIS models generated by the IBIS Writer cannot be used to account correctly for the double counting problem. The load value mismatch between the IBIS delay and the tCO measurement of the Intel® Quartus® Prime software prevents the delays from being safely added together. Warning messages displayed when the EDA Netlist Writer runs indicate when this mismatch occurs.

Did you find the information on this page useful?

Characters remaining:

Feedback Message