ID 683768
Date 11/04/2020
Public

## 1.5.12.2. Simulation Conditions

The simulation conditions block loads the appropriate process corner models for the transistors. This condition is automatically set up for the slow timing corner and must be modified only if other simulation corners are desired.

### Simulation Conditions Block

* Process Settings  .options brief
.inc ‘sii_tt.inc’ * typical-typical process corner
Note: Two separate corners cannot be simulated at the same time. Instead, simulate the base case using the Quartus corner as one simulation and then perform a second simulation using the desired customer corner. The results of the two simulations can be manually added together.