Low Latency 40-Gbps Ethernet IP Core User Guide

Download PDF
ID 683745
Date 3/08/2021
Public
Document Table of Contents
Document Table of Contents x
1. About the LL 40GbE IP Core 2. Getting Started 3. Functional Description 4. Debugging the Link A. Arria 10 10GBASE-KR Registers B. Additional Information
1. About the LL 40GbE IP Core x
1.1. LL 40GbE IP Core Supported Features 1.2. IP Core Device Family and Speed Grade Support 1.3. IP Core Verification 1.4. Performance and Resource Utilization 1.5. Release Information
1.2. IP Core Device Family and Speed Grade Support x
1.2.1. LL 40GbE IP Core Device Family Support 1.2.2. LL 40GbE IP Core Device Speed Grade Support
1.3. IP Core Verification x
1.3.1. Simulation Environment 1.3.2. Compilation Checking 1.3.3. Hardware Testing
1.4. Performance and Resource Utilization x
1.4.1. Arria 10 Resource Utilization 1.4.2. Stratix V Resource Utilization
2. Getting Started x
2.1. Installation and Licensing for LL 40GbE IP Core for Stratix® V Devices 2.2. Installing and Licensing Intel® FPGA IP Cores 2.3. Specifying the IP Core Parameters and Options 2.4. IP Core Parameters 2.5. Files Generated for Stratix V Variations 2.6. Files Generated for Arria 10 Variations 2.7. Integrating Your IP Core in Your Design 2.8. IP Core Testbenches 2.9. Compiling the Full Design and Programming the FPGA 2.10. Initializing the IP Core
2.2. Installing and Licensing Intel® FPGA IP Cores x
2.2.1. Intel® FPGA IP Evaluation Mode
2.7. Integrating Your IP Core in Your Design x
2.7.1. Pin Assignments 2.7.2. External Transceiver Reconfiguration Controller Required in Stratix V Designs 2.7.3. Transceiver PLL Required in Arria 10 Designs 2.7.4. Handling Potential Jitter in Intel® Arria® 10 Devices 2.7.5. External Time-of-Day Module for Variations with 1588 PTP Feature 2.7.6. Clock Requirements for 40GBASE-KR4 Variations 2.7.7. External TX MAC PLL 2.7.8. Placement Settings for the LL 40GbE Core
2.8. IP Core Testbenches x
2.8.1. Testbench Behavior 2.8.2. Simulating the LL 40GbE IP Core With the Testbenches
2.8.2. Simulating the LL 40GbE IP Core With the Testbenches x
2.8.2.1. Generating the LL 40GbE Testbench 2.8.2.2. Optimizing the IP Core Simulation With the Testbenches 2.8.2.3. Optimization in the 40GBASE-KR4 Testbench 2.8.2.4. Simulating with the Modelsim Simulator 2.8.2.5. Simulating with the NCSim Simulator 2.8.2.6. Simulating with the VCS Simulator 2.8.2.7. Testbench Output Example
3. Functional Description x
3.1. High Level System Overview 3.2. LL 40GbE IP Core Functional Description 3.3. Signals 3.4. Software Interface: Registers 3.5. Ethernet Glossary
3.2. LL 40GbE IP Core Functional Description x
3.2.1. LL 40GbE IP Core TX Datapath 3.2.2. LL 40GbE IP Core TX Data Bus Interfaces 3.2.3. LL 40GbE IP Core RX Datapath 3.2.4. LL 40GbE IP Core RX Data Bus Interfaces 3.2.5. External Reconfiguration Controller 3.2.6. External Transceiver PLL 3.2.7. External TX MAC PLL 3.2.8. Congestion and Flow Control Using Pause Frames 3.2.9. Pause Control and Generation Interface 3.2.10. Pause Control Frame Filtering 3.2.11. Link Fault Signaling Interface 3.2.12. Statistics Counters Interface 3.2.13. 1588 Precision Time Protocol Interfaces 3.2.14. PHY Status Interface 3.2.15. Transceiver PHY Serial Data Interface 3.2.16. Low Latency 40GBASE-KR4 IP Core Variations 3.2.17. Control and Status Interface 3.2.18. Arria 10 Transceiver Reconfiguration Interface 3.2.19. Clocks 3.2.20. Resets
3.2.1. LL 40GbE IP Core TX Datapath x
3.2.1.1. Preamble, Start, and SFD Insertion 3.2.1.2. Address Insertion 3.2.1.3. Length/Type Field Processing 3.2.1.4. Frame Padding 3.2.1.5. Frame Check Sequence (CRC-32) Insertion 3.2.1.6. Inter-Packet Gap Generation and Insertion 3.2.1.7. Error Insertion Test and Debug Feature
3.2.2. LL 40GbE IP Core TX Data Bus Interfaces x
3.2.2.1. LL 40GbE IP Core User Interface Data Bus 3.2.2.2. LL 40GbE IP Core TX Data Bus with Adapters (Avalon-ST Interface) 3.2.2.3. LL 40GbE IP Core TX Data Bus Without Adapters (Custom Streaming Interface) 3.2.2.4. Bus Quantization Effects With Adapters 3.2.2.5. User Interface to Ethernet Transmission
3.2.2.5. User Interface to Ethernet Transmission x
3.2.2.5.1. Order of Transmission
3.2.3. LL 40GbE IP Core RX Datapath x
3.2.3.1. LL 40GbE IP Core RX Filtering 3.2.3.2. LL 40GbE IP Core Preamble Processing 3.2.3.3. IP Core Strict SFD Checking 3.2.3.4. LL 40GbE IP Core FCS (CRC-32) Removal 3.2.3.5. LL 40GbE IP Core CRC Checking 3.2.3.6. LL 40GbE IP Core Malformed Packet Handling 3.2.3.7. RX CRC Forwarding 3.2.3.8. Inter-Packet Gap 3.2.3.9. Pause Ignore 3.2.3.10. Control Frame Identification
3.2.4. LL 40GbE IP Core RX Data Bus Interfaces x
3.2.4.1. LL 40GbE IP Core User Interface Data Bus 3.2.4.2. LL 40GbE IP Core RX Data Bus with Adapters (Avalon-ST Interface) 3.2.4.3. LL 40GbE IP Core RX Data Bus Without Adapters (Custom Streaming Interface)
3.2.8. Congestion and Flow Control Using Pause Frames x
3.2.8.1. Conditions Triggering XOFF Frame Transmission 3.2.8.2. Conditions Triggering XON Frame Transmission
3.2.12. Statistics Counters Interface x
3.2.12.1. OctetOK Count Interface
3.2.13. 1588 Precision Time Protocol Interfaces x
3.2.13.1. Implementing a 1588 System That Includes a LL 40GbE Core 3.2.13.2. PTP Receive Functionality 3.2.13.3. PTP Transmit Functionality 3.2.13.4. External Time-of-Day Module for 1588 PTP Variations 3.2.13.5. PTP Timestamp and TOD Formats 3.2.13.6. 1588 PTP Interface Signals
3.3. Signals x
3.3.1. LL 40GbE IP Core Signals
3.4. Software Interface: Registers x
3.4.1. LL 40GbE IP Core Registers 3.4.2. LL 40GbE Hardware Design Example Registers
3.4.1. LL 40GbE IP Core Registers x
3.4.1.1. PHY Registers 3.4.1.2. Link Fault Signaling Registers 3.4.1.3. LL 40GBASE-KR4 Registers 3.4.1.4. LL 40GbE IP Core MAC Configuration Registers 3.4.1.5. Pause Registers 3.4.1.6. TX Statistics Registers 3.4.1.7. RX Statistics Registers 3.4.1.8. 1588 PTP Registers
3.4.2. LL 40GbE Hardware Design Example Registers x
3.4.2.1. Packet Client Registers
4. Debugging the Link x
4.1. Creating a Signal Tap Debug File to Match Your Design Hierarchy
A. Arria 10 10GBASE-KR Registers x
A.1. 10GBASE-KR PHY Register Definitions
B. Additional Information x
B.1. LL 40GbE IP Core User Guide Archives B.2. LL 40GbE IP Core User Guide Revision History
1. About the LL 40GbE IP Core
2. Getting Started
3. Functional Description
4. Debugging the Link
A. Arria 10 10GBASE-KR Registers
B. Additional Information

3.2.11. Link Fault Signaling Interface

If you turn on Enable link fault generation in the LL 40GbE parameter editor, the LL 40GbE IP core provides link fault signaling as defined in the IEEE 802.3ba-2010 High Speed Ethernet Standard and Clause 66 of the IEEE 802.3-2012 Ethernet Standard, based on the LINK_FAULT_CONFIG register settings. The LL 40GbE MAC includes a Reconciliation Sublayer (RS) located between the MAC and the XLGMII or CGMII to manage local and remote faults. Link fault signaling on the Ethernet link is disabled by default but can be enabled by bit [0] of the LINK_FAULT_CONFIG register. When the LINK_FAULT_CONFIG register bits [1:0] have the value of 2'b01, link fault signaling is enabled in normal bidirectional mode. In this mode, the local RS TX logic transmits remote fault sequences in case of a local fault and transmits IDLE control words in case of a remote fault.

If you turn on bit [1] of the LINK_FAULT_CONFIG register, the IP core conforms to Clause 66 of the IEEE 802.3-2012 Ethernet Standard. When LINK_FAULT_CONFIG[1:0] has the value of 2'b11, the IP core transmits the fault sequence ordered sets in the interpacket gaps according to the clause requirements.

The RS RX logic sets remote_fault_status or local_fault_status to 1 when the RS RX block receives remote fault or local fault sequence ordered sets. When valid data is received in more than 127 columns, the RS RX logic resets the relevant fault status (remote_fault_status or local_fault_status) to 0.

The IEEE standard specifies RS monitoring of RXC<7:0> and RXD<63:0> for Sequence ordered_sets. For more information, refer to Figure 81–9—Link Fault Signaling state diagram and Table 81-5—Sequence ordered_sets in the IEEE 802.3ba 2010 High Speed Ethernet Standard. The variable link_fault is set to indicate the value of an RX Sequence ordered_set when four fault_sequences containing the same fault value are received with fault sequences separated by less than 128 columns and with no intervening fault_sequences of different fault values. The variable link_fault is set to OK following any interval of 128 columns not containing a remote fault or local fault Sequence ordered_set.

Table 23.  Signals of the Link Fault Signaling InterfaceThese signals are available only if you turn on Enable link fault generation in the LL 40GbE parameter editor.

Signal Name

Direction

Description

remote_fault_status

Output

Asserted by the IP core when it detects a real-time remote fault in the RX MAC. The IP core asserts this signal regardless of the settings in the LINK_FAULT_CONFIG register.

This signal is clocked by clk_rxmac.

local_fault_status

Output

Asserted by the IP core when it detects a real-time local fault in the RX MAC. The IP core asserts this signal regardless of the settings in the LINK_FAULT_CONFIG register.

This signal is clocked by clk_rxmac.

unidirectional_en Output The IP core asserts this signal if it includes Clause 66 support for remote link fault reporting on the Ethernet link. Connects to the Unidir Enable field in bit [1] of the LINK_FAULT_CONFIG register at offset 0x405.

This signal is clocked by clk_txmac.

link_fault_gen_en Output The IP core asserts this signal if the PCS is enabled to generate a remote fault sequence on the Ethernet link when appropriate. Connects to the Link Fault Reporting Enable field in bit [0] of the LINK_FAULT_CONFIG register at offset 0x405.

This signal is clocked by clk_txmac.

Related Information
Level Two Title