Intel® Agilex™ Configuration User Guide

ID 683673
Date 7/05/2022

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents Programming CPLDs and Flash Memory Devices Sequentially

This procedure provides a single set of instructions for the Intel® Quartus® Prime Programmer to configure the CPLD and write the flash memory device.

  1. Open the Programmer and click Add File to add the .pof for the CPLD.
  2. Right-click the CPLD .pof and click Attach Flash Device.
  3. In the Flash Device menu, select the appropriate density for the flash memory device.
  4. Right-click the flash memory device density and click Change File.
  5. Select the .pof generated for the flash memory device. The Programmer appends the .pof for the flash memory device to the .pof for the CPLD.
  6. Repeat this process if your chain has additional devices.
  7. Check all the boxes in the Program/Configure column for the new .pof and click Start to program the CPLD and flash memory device.

Did you find the information on this page useful?

Characters remaining:

Feedback Message