Intel® Quartus® Prime Pro Edition User Guide: Platform Designer

ID 683609
Date 12/12/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

5.3.1. Implementing Concurrency With Multiple Hosts

Implementing concurrency requires multiple hosts in a Platform Designer system. Systems that include a processor contain at least two host interfaces because the processors include separate instruction and data hosts. You can categorize host components as follows:

  • General purpose processors, such as Nios® II processors
  • DMA (direct memory access) engines
  • Communication interfaces, such as PCI Express
Because Platform Designer generates an interconnect with agent-side arbitration, every host interface in a system can issue transfers concurrently, if they are not posting transfers to the same agent. Concurrency is limited by the number of host interfaces sharing any particular agent interface. If a design requires higher data throughput, you can increase the number of host and agent interfaces to increase the number of transfers that occur simultaneously. The example below shows a system with three host interfaces.
Figure 143.  Avalon® Multiple Host Parallel AccessIn this Avalon® example, the DMA engine operates with Avalon® memory mapped read and write hosts. The yellow lines represent active simultaneous connections.
Figure 144. AXI Multiple Manager Parallel AccessIn this example, the DMA engine operates with a single manager, because in AXI, the write and read channels on the manager are independent and can process transactions simultaneously. There is concurrency between the read and write channels, with the yellow lines representing concurrent datapaths.