1. Intel® Stratix® 10 SEU Mitigation Overview 2. Intel® Stratix® 10 Mitigation Techniques for CRAM 3. Secure Device Manager ECC Error Detection 4. Intel® Stratix® 10 SEU Mitigation Implementation Guides 5. Advanced SEU Detection Intel® FPGA IP References 6. Intel® Stratix® 10 Fault Injection Debugger References 7. Intel® Stratix® 10 SEU Mitigation User Guide Archives 8. Document Revision History for the Intel® Stratix® 10 SEU Mitigation User Guide
4.1. Setting SEU_ERROR Pin 4.2. Intel® Quartus® Prime SEU Software Settings 4.3. Enabling Priority Scrubbing 4.4. Performing Hierarchy Tagging 4.5. Programming Sensitivity Map Header File into Memory 4.6. Performing Lookup for Sensitivity Map Header 4.7. Using the Fault Injection Debugger 4.8. Analyzing SEU Errors Using Signal Tap 4.9. Intel® Quartus® Prime Software SEU FIT Reports
4.9.3. Projected SEU FIT by Component Usage Report
The Projected SEU FIT by Component Usage report shows the different components (or cell types) that comprise the total FIT rate, and SEU FIT calculation results.
An Intel FPGA's sensitivity to soft errors varies by process technology, component type, and your design choices when implementing the component (such as tradeoffs between area/delay and SEU rates). The report shows all bits (the raw FIT), utilized bits (only resources the design actually uses), and the ECC-mitigated bits.
Figure 13. Projected SEU FIT by Component Usage Report
Did you find the information on this page useful?