A newer version of this document is available. Customers should click here to go to the newest version.
4.4. Precision Time Protocol
The Precision Time Protocol (PTP) provides 1588 Precision Time Protocol timestamp information as defined in the IEEE 1588-2008 Precision Clock Synchronization Protocol for Networked Measurement and Control System Standard. 1588 PTP logic generates 96-bit timestamp information for transmitted and received packets. The generated timestamps represent the time when the first bit after the Start of Frame Delimiter (SFD) byte crosses the FPGA serial pins (Medium Dependent Interface, MDI).
In a 1-step TX operation, the IP core updates the PTP message content on-the-fly during the packet transmission. The update includes a 96-bit 1588 v2 format timestamp, updated correction field with residence time, asymmetry delay, and the peer-to-peer mean path delay. The IP core sets the UDP/IPv4 checksum field to zero and updates extended bytes to a correct checksum of the UDP/IPv6 packets.
A fingerprint can accompany a 1588 PTP packet. You can use this information to associate returned TX timestamp to the transmitted PTP packet. If you provide fingerprint information, the IP core passes it through unchanged.
The IP core connects to a time-of-day (TOD) module that continuously provides the current time of day based on the input clock frequency.
For proper connectivity between the F-Tile Ethernet Intel® FPGA Hard IP in PTP mode and the supporting logic blocks, refer to the F-Tile Ethernet Intel® FPGA Hard IP Design Example.
- PTP Timestamp Accuracy
- PTP Client Flow
- RX Virtual Lane Offset Calculation for No FEC Variants
- Virtual Lane Order and Offset Values
- UI Adjustment
- Reference Time Interval
- Minimum and Maximum Reference Time (TAM) Interval for UI Measurement (Hardware)
- UI Value and PMA Delay
- Routing Delay Adjustment for Advanced Timestamp Accuracy Mode
Did you find the information on this page useful?