Visible to Intel only — GUID: bhc1395127683580
Ixiasoft
1. Low Latency Ethernet 10G MAC Intel® FPGA IP Overview
2. Getting Started
3. Functional Description
4. Parameter Settings for the Low Latency Ethernet 10G MAC Intel® FPGA IP Core
5. Interface Signals
6. Configuration Registers
7. Document Revision History for the Low Latency Ethernet 10G MAC Intel® FPGA IP User Guide: Agilex™ 5 FPGAs and SoCs
2.1. Introduction to Intel® FPGA IP Cores
2.2. Installing and Licensing Intel® FPGA IP Cores
2.3. Specifying the IP Core Parameters and Options ( Quartus® Prime Pro Edition)
2.4. Generated File Structure
2.5. Simulating Intel® FPGA IP Cores
2.6. Upgrading the Low Latency Ethernet 10G MAC Intel® FPGA IP Core
2.7. Low Latency Ethernet 10G MAC Intel® FPGA IP Design Examples
5.1. Clock and Reset Signals
5.2. Speed Selection Signal
5.3. Error Correction Signals
5.4. Avalon® Memory-Mapped Interface Programming Signals
5.5. Avalon® Streaming Data Interfaces
5.6. Avalon® Streaming Flow Control Signals
5.7. Avalon® Streaming Status Interface
5.8. PHY-side Interfaces
5.9. IEEE 1588v2 Interfaces
Visible to Intel only — GUID: bhc1395127683580
Ixiasoft
3.5.2. CRC Checking
The MAC RX computes the CRC-32 checksum over frame bytes received and compares the computed value against the CRC field in the receive frame. If the values do not match, the MAC RX marks the frame invalid by setting avalon_st_rx_error[1] to 1 and forwards the receive frame to the client. When the CRC error indicator is asserted, the external logic is expected to drop the frame bytes.