Supported Devices Features Operating Conditions Pin Information Device Package and Ordering Code Memory Array Organization Memory Operations Registers Summary of Operation Codes Power Mode Timing Information Programming and Configuration File Support Document Revision History for EPCQ-L Serial Configuration Devices Datasheet
Block Protection Bits in EPCQ-L256 when TB Bit is Set to 0 Block Protection Bits in EPCQ-L256 when TB Bit is Set to 1 Block Protection Bits in EPCQ-L512 when TB Bit is Set to 0 Block Protection Bits in EPCQ-L512 when TB Bit is Set to 1 Block Protection Bits in EPCQ-L1024 when TB Bit is Set to 0 Block Protection Bits in EPCQ-L1024 when TB Bit is Set to 1
4BYTEADDREN and 4BYTEADDREX Operations (B7h and E9h) Write Enable Operation (06h) Write Disable Operation (04h) Read Bytes Operation (03h) Fast Read Operation (Bh) Extended Quad Input Fast Read Operation (EBh) Read Device Identification Operation (9Eh or 9Fh) Write Bytes Operation (02h) Extended Quad Input Fast Write Bytes Operation (12h) Erase Bulk Operation (C7h) Erase Die Operation (C4h) Erase Sector Operation (D8h)
Absolute Maximum Ratings
|VCC||Supply voltage||With respect to GND||–0.6||2.4||V|
|VIO 3||DC input/output voltage||With respect to GND||–0.6||VCC + 0.6||V|
|TSTG||Storage temperature||No bias||–65||150||ºC|
3 For periods of less than 10 ns, VIL can undershoot to –1.0 V and VIH can overshoot to VCC + 1.0 V.
Did you find the information on this page useful?