eCPRI Intel® FPGA IP User Guide

Download PDF
ID 683685
Date 12/14/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Introduction 2. Getting Started 3. IP Parameters 4. Functional Description 5. Interface Overview 6. Registers 7. eCPRI Intel FPGA IP User Guide Archives 8. Document Revision History for eCPRI Intel® FPGA IP User Guide
1. Introduction x
1.1. Supported Features 1.2. Device Family Support 1.3. eCPRI Intel® FPGA IP Device Speed Grade Support 1.4. Resource Utilization 1.5. Intel® FPGA IP Core Verification 1.6. Release Information
2. Getting Started x
2.1. Installing and Licensing 2.2. Specifying the IP Core Parameters and Options 2.3. Generated File Structure 2.4. Simulating the IP Core 2.5. Compiling the Full Design and Programming the FPGA
2.2. Specifying the IP Core Parameters and Options x
2.2.1. Reference and System PLL Clock for your IP Design
4. Functional Description x
4.1. Interfaces 4.2. High Level Data Path Flow 4.3. Operation of the eCPRI IP Blocks
4.2. High Level Data Path Flow x
4.2.1. Transmit TX Path 4.2.2. Receive RX Path 4.2.3. Supported Ethernet Variants
4.3. Operation of the eCPRI IP Blocks x
4.3.1. Packet Classifier 4.3.2. Ethernet Header Insertion/Removal 4.3.3. Concatenation/De-concatenation 4.3.4. Header Mapper/De-Mapper 4.3.5. eCPRI IWF Type 0 4.3.6. eCPRI Message 5 Packet Parser 4.3.7. Packet Queue 4.3.8. eCPRI Message Type 4.3.9. Error Handling 4.3.10. RX Throttling
4.3.8. eCPRI Message Type x
4.3.8.1. eCPRI Message Type 0- IQ Data Transfer 4.3.8.2. eCPRI Message Type 1- Bit Sequence Transfer 4.3.8.3. eCPRI Message Type 2- Real Time Control Data 4.3.8.4. eCPRI Message Type 3- Generic Data Transfer 4.3.8.5. eCPRI Message Type 4- Remote Memory Access 4.3.8.6. eCPRI Message Type 5- One-Way Delay Measurement 4.3.8.7. eCPRI Message Type 6- Remote Reset 4.3.8.8. eCPRI Message Type 7- Event Indication 4.3.8.9. eCPRI Message Type 64- 255 Vendor Specific
5. Interface Overview x
5.1. Clock Signals 5.2. Power, Reset, and Firewalls Signals 5.3. TX Time of Day Interface 5.4. RX Time of Day Interface 5.5. Interrupt 5.6. Configuration Avalon® Memory-Mapped Interface 5.7. Ethernet MAC Source Interface 5.8. Ethernet MAC Sink Interface 5.9. External ST Source Interface 5.10. External ST Sink Interface 5.11. eCPRI IP Source Interface 5.12. eCPRI IP Sink Interface 5.13. Miscellaneous Interface Signals 5.14. IWF Type 0 eCPRI Interface 5.15. IWF Type 0 CPRI MAC Interface
5.2. Power, Reset, and Firewalls Signals x
5.2.1. Reset Control and Initialization Flows
5.7. Ethernet MAC Source Interface x
5.7.1. E-tile Hard IP for Ethernet 1588 PTP Signals 5.7.2. 25G Ethernet MAC 1588 PTP Signals 5.7.3. 10G Ethernet MAC 1588 PTP Signals
5.14. IWF Type 0 eCPRI Interface x
5.14.1. IWF Source Interface 5.14.2. IWF Sink Interface
5.15. IWF Type 0 CPRI MAC Interface x
5.15.1. CPRI 32-bit IQ Data TX Interface 5.15.2. CPRI 64-bit IQ Data TX Interface 5.15.3. CPRI 32-bit Ctrl_AxC TX Interface 5.15.4. CPRI 64-bit Ctrl_AxC TX Interface 5.15.5. CPRI 32-bit Vendor Specific TX Interface 5.15.6. CPRI 64-bit Vendor Specific TX Interface 5.15.7. CPRI 32-bit Real-time Vendor Specific TX Interface 5.15.8. CPRI 64-bit Real-time Vendor Specific TX Interface 5.15.9. CPRI Gigabit Media Independent Interface (GMII) 5.15.10. CPRI IP L1 Control and Status Interface
6. Registers x
6.1. eCPRI Version Register 6.2. eCPRI Scratch Register 6.3. eCPRI Common Control Register 6.4. eCPRI Message 5 Control Register 6.5. eCPRI TX Error Message Register 6.6. eCPRI RX Error Message Register 6.7. eCPRI Error Mask Message Register 6.8. eCPRI Error Log Message Register 6.9. eCPRI Error Message 5 Compensation Value 0 Register 6.10. eCPRI Error Message 5 Compensation Value 1 Register 6.11. eCPRI Transport Delay 0 Register 6.12. eCPRI Transport Delay 1 Register 6.13. eCPRI Transport Delay 2 Register 6.14. Ethernet Frame Scratch Register 6.15. Source MAC Address <i> Register, where i= 0, 1 6.16. Destination MAC n Address <i> Register, where n= 0, 1, 2, 3, 4, 5, 6, 7 and i= 0, 1 6.17. VLAN Tag Register <i>, where i= 0, 1, 2, 3, 4, 5, 6, 7 6.18. Ethertype Register 6.19. IPv4 Dw0 Register 6.20. IPv4 Dw1 Register 6.21. IPv4 Dw2 Register 6.22. IPv4 Source Address Register 6.23. IPv4 Destination Address Register 6.24. UDP Dw0 Register 6.25. UDP Port Register 6.26. MAC Packet Type Enable Register 6.27. RX Error Register
1. Introduction
2. Getting Started
3. IP Parameters
4. Functional Description
5. Interface Overview
6. Registers
7. eCPRI Intel FPGA IP User Guide Archives
8. Document Revision History for eCPRI Intel® FPGA IP User Guide

4.3.6. eCPRI Message 5 Packet Parser

This block is responsible to initiate and calculate the eCPRI one-way delay measurement on the transport link. The eCPRI one-way delay measurement can be performed without (one-step) or with a follow-up message (two-step). The process is initiated when a CSR is written to eCPRI Message 5 Control Register. The IP transmits eCPRI message 5 with one-step first before sending eCPRI message 5 with timestamp t1 and cv1 for two-step delay measurement. The packet parser assembles an eCPRI message 5 with timestamp t1 taken from Time-of-Day (TOD) module. Then, this eCPRI message 5 is sent through the Ethernet MAC with compensation value cv1 filled using 1588 PTP hardware.

On the receiving end, the eCPRI IP responses the message 5 with t2 and cv2. Upon receiving the response packet, this calculates the transport delay using the formula:tD12= (t2-+tCV2) - (t1 + tCV1)

The waveform below shows an example of the Avalon® streaming interface source and sink data through L2/L3 parser. The example in this section uses E-tile Ethernet Hard IP with 1588 PTP feature enabled.
Timing Diagram of One-Way Delay Measurement Example
The timing diagram below illustrates the eCPRI message 5 in one-step one way delay measurement.
Timing Diagram of eCPRI Message Type 5 in one-step
The timing diagram below illustrates the eCPRI message 5 in two-step one way delay measurement.
Timing Diagram of eCPRI Message Type 5 in two-step

The one and two- steps one way delay measurement sequences uses same remote request type. The only difference is destination eCPRI IP measures t1 and tcv1 while the source eCPRI IP measures t2 and tcv2.

Level Two Title