eCPRI Intel® FPGA IP User Guide

ID 683685
Date 12/14/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

6.16. Destination MAC n Address <i> Register, where n= 0, 1, 2, 3, 4, 5, 6, 7 and i= 0, 1

Table 69.  Destination MAC Address Register at Offset 0x0013, 0x0014, 0x0015, 0x0016, 0x0017, 0x0018, 0x0019, 0x001A, 0x001B, 0x001C, 0x001D, 0x001E, 0x001F, 0x0020, 0x0021, 0x0022
Register Bit Width Description Access Reset
dest_mac_addr_<i> [31:0] When i=0, it indicates lower four bytes of the destination MAC address. Configure this register with a non-zero value before you enable the eCPRI IP for operations.
Map the source MAC address as follows:
  • dest_mac_addr_0: Lower four bytes of the destination MAC address. Example, If the source MAC address is 00-1C-23-17-4A-CB, set value of this field to 0x23174ACB
  • dest_mac_addr_1, it indicates upper two bytes of the destination MAC address. Set the value of this field to 0x0000001C
When i=1 , bits [31:16] are reserved.
RW 0x0