Intel® Stratix® 10 TX Transceiver Signal Integrity Development Kit User Guide

ID 683591
Date 9/27/2019
Document Table of Contents

A.1. Add SmartVID settings in QSF file

Intel® Stratix® 10 FPGA silicon assembled on the Intel® Stratix® 10 TX Transceiver Signal Integrity Development Kit enables SmartVID feature by default.

You may encounter the following error message when you switch from using the example design to your own design:

Error(19192): File <filename>.sof is incomplete - Power management settings are not set up appropriately on VID part"

To prevent Intel® Quartus® Prime from generating an error message due to incomplete SmartVID settings, you must put constraints listed below into the Intel® Quartus® Prime project QSF file.

Open your Intel® Quartus® Prime project QSF file, copy and paste the constraints listed below in the QSF file.

Before, you compile your project with correct SmartVID settings, ensure that there are no other similar settings with different values.


set_global_assignment -name PWRMGT_BUS_SPEED_MODE "400 KHZ"

set_global_assignment -name PWRMGT_SLAVE_DEVICE0_ADDRESS 47

set_global_assignment -name PWRMGT_SLAVE_DEVICE1_ADDRESS 48

set_global_assignment -name PWRMGT_SLAVE_DEVICE2_ADDRESS 00

set_global_assignment -name PWRMGT_SLAVE_DEVICE3_ADDRESS 00

set_global_assignment -name PWRMGT_SLAVE_DEVICE4_ADDRESS 00

set_global_assignment -name PWRMGT_SLAVE_DEVICE5_ADDRESS 00

set_global_assignment -name PWRMGT_SLAVE_DEVICE6_ADDRESS 00

set_global_assignment -name PWRMGT_SLAVE_DEVICE7_ADDRESS 00

set_global_assignment -name PWRMGT_PAGE_COMMAND_ENABLE ON

set_global_assignment -name USE_PWRMGT_SCL SDM_IO14

set_global_assignment -name USE_PWRMGT_SDA SDM_IO11

set_global_assignment -name USE_PWRMGT_ALERT SDM_IO12

set_global_assignment -name USE_CONF_DONE SDM_IO16

set_global_assignment -name USE_INIT_DONE SDM_IO0

set_global_assignment -name USE_CVP_CONFDONE SDM_IO15

set_global_assignment -name USE_SEU_ERROR SDM_IO13

The Intel® Stratix® 10 device family offers SmartVID standard power devices in all speed grades. Lower power fixed-voltage devices are also available in all speed grades except for the fastest speed grade. Please refer to Intel Stratix 10 Power Management User Guide for additional information.