Intel® Stratix® 10 TX Transceiver Signal Integrity Development Kit User Guide

ID 683591
Date 9/27/2019
Document Table of Contents

5.3.3. The GPIO Tab

The GPIO Tab allows you to interact with all the genral purpose user I/O components on your board. You can read DIP switch settings, turn LEDs on or off and detect push button presses.

Figure 16. The GPIO Tab

The following sections describe the controls on the GPIO tab.

User DIP Switches

The read-only User DIP switches control displays the current positions of the switches in the user DIP switch bank (SW4). Change the switches on the board to see the graphical display change.

User LEDs

The User LEDs control displays the current state of the user LEDs. Toggle the LED buttons to turn the board LEDs on and off.

User Push Buttons

The read-only User Push Button control displays the current status of the push buttons. Press the push button on the board to see the graphical display change.

Qsys Memory Map

Shows the memory map of the GPIO/FLASH Qsys system on yor board.