September 2017 |
2017.09.07 |
Updated I/O standard voltage values in the On-Board Oscillators table in On-Board Oscillators. |
January 2017 |
2017.01.04 |
Corrected the following pin assignments in "10/100/1000 Ethernet PHY":
- ENETA_TX_D1 on pin P5
- ENETA_RX_ER on pin U2
- ENET_MDIO on pin Y5
- ENETB_TX_D2 on pin U3
- ENETB_RS_D3 on pin R7
|
November 2015 |
2015.11.06 |
- Updated "USB to UART" section.
- Added note to "General User Input/Output section".
|
June 2015 |
2015.06.26 |
- Updated "DDR3 Rev. B Board" section.
|
May 2015 |
2015.05.21 |
- Added quad SPI content for Rev. B & C boards.
- Corrected two PMOD pin signal names for Rev. B & C boards.
- Changed four MAX 10 pins for DDR3 for Rev. C board only.
- Changed two switch/signal names for SW2 for Rev. C board only.
- Updated Switch and Jumper Settings section with VTAP description.
|
March 2015 |
2015.03.31 |
Initial release. |