Thermal Design User Guide: MAX® 10 FPGA B610 Package

Download PDF
ID 851247
Date 5/20/2025
Public
Document Table of Contents
Document Table of Contents x
1. Introduction to MAX® 10 FPGA B610 Package Thermal Design Guidelines 2. MAX® 10 FPGA B610 Package Mechanical Construction 3. MAX® 10 FPGA B610 Package CTM Construction 4. Quartus Requirements and Power Estimation 5. General FPGA Thermal Design Considerations 6. Thermal Design Process 7. Thermal Solution Mechanical Design 8. Vendor References 9. Document Revision History for the MAX® 10 FPGA B610 Package Thermal Design User Guide A. Thermal Design Elements
1. Introduction to MAX® 10 FPGA B610 Package Thermal Design Guidelines x
1.1. Thermal Design Requirements 1.2. Definitions of Thermal and Power Terms Used in this Document
2. MAX® 10 FPGA B610 Package Mechanical Construction x
2.1. Thermal Design Process Flow 2.2. Thermal Resistance Values Summary
3. MAX® 10 FPGA B610 Package CTM Construction x
3.1. CTM File Format 3.2. Thermal Modeling with the CTM 3.3. Obtaining the CTM
4. Quartus Requirements and Power Estimation x
4.1. Board Thermal Model 4.2. QPA Outputs
5. General FPGA Thermal Design Considerations x
5.1. FPGA Power Considerations 5.2. FPGA Maximum Allowed Power Dissipation 5.3. Static, Dynamic, and Standby Power
6. Thermal Design Process x
6.1. Package Heat Flow Path 6.2. Recommended Thermal Design Methodology
7. Thermal Solution Mechanical Design x
7.1. Mechanical Design 7.2. TIM2 Selection 7.3. Summary
7.1. Mechanical Design x
7.1.1. Bond Line Thickness (BLT) 7.1.2. Die Warpage 7.1.3. Package Loading 7.1.4. Recommended Pressure Variation Across the Package
7.2. TIM2 Selection x
7.2.1. Gap Pad TIMs 7.2.2. Gap Pad TIM Thermal Conductivity Data 7.2.3. Parametric Studies with Different TIM Materials
1. Introduction to MAX® 10 FPGA B610 Package Thermal Design Guidelines
2. MAX® 10 FPGA B610 Package Mechanical Construction
3. MAX® 10 FPGA B610 Package CTM Construction
4. Quartus Requirements and Power Estimation
5. General FPGA Thermal Design Considerations
6. Thermal Design Process
7. Thermal Solution Mechanical Design
8. Vendor References
9. Document Revision History for the MAX® 10 FPGA B610 Package Thermal Design User Guide
A. Thermal Design Elements

3.2. Thermal Modeling with the CTM

To perform thermal modeling with a CTM, you must create a CFD model that includes the relevant CTM(s) and power values for the die(s). These power values are obtained using the Quartus® Prime software, as outlined in the Quartus Requirements and Power Estimation section. Because FPGAs can have numerous unique designs, each with different power dissipation characteristics, there is no fixed thermal design power (TDP); therefore, thermal analysts must work with the FPGA design team to obtain power values and the target TJ limit for each design iteration.

Although CFD analysis predicts the temperature of all CTM components, the crucial data is the TJ temperature which is maximum package or die junction temperature, which indicates if the cooling solution meets design requirements. This must be below the target value.

Level Two Title